Splashbacks and tiling in Bury

When do splashbacks and tiling make sense in Bury?

Many people in Greater Manchester choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

If the kitchen in your Bury home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units. We cover all of Bury, including the BL9 postcode district, and travel out to neighbouring towns across Greater Manchester.

What is included in the work?

Your written quote lists everything included. For splashbacks and tiling, that normally means:

Tiled splashbacks between the worktop and wall units, set out from a centre line
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Full-height or feature tiling behind the hob, sink or open shelving
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Old tiles removed and walls prepared, patched or boarded where needed
Socket and switch plates refitted by an electrician once the tiling is finished

What do splashbacks and tiling cost in Bury?

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

What do splashbacks and tiling cost in Bury?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Bury homes

Across Greater Manchester you will often find Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, and each shapes the kitchen differently. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in. Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner.

Building regulations, electrics and gas in Bury

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Worth knowing before the fit

Choosing stone worktops for a Bury kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Ask to see where the tiling will start before the first row goes on in your Bury kitchen, so narrow cut tiles end up in corners rather than on show.
Hold a few of your chosen tiles against the wall in your Bury kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.

Questions about splashbacks and tiling in Bury

How much do splashbacks and tiling cost in Bury?

Splashbacks and tiling in Bury typically cost £140 to £380 including VAT for a tiled splashback, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Bury?

Yes. We work across Bury, including the BL9 postcode district, and nearby towns such as Radcliffe and Heywood. Book a free survey visit and we will arrange a time that suits you.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Splashbacks and tiling near Bury

Close to Bury? We cover these nearby towns too: