Splashbacks and tiling in Brighouse

Why splashbacks and tiling for a Brighouse home?

Many people in West Yorkshire choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

Landlords around West Yorkshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. We work throughout Brighouse (HD6) and across the wider West Yorkshire area.

What is included in the work?

Here is what usually goes into splashbacks and tiling, adjusted to your Brighouse kitchen after we have measured it:

Free survey visit to check the walls, agree the layout and give an itemised quote
Old tiles removed and walls prepared, patched or boarded where needed
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Tiled splashbacks between the worktop and wall units, set out from a centre line
Socket and switch plates refitted by an electrician once the tiling is finished
Stone upstands and splashbacks templated and fitted alongside a stone worktop

What should you budget for splashbacks and tiling in Brighouse?

The figures below are guide prices for Brighouse, including VAT and adjusted for typical costs across Yorkshire and the Humber. The fixed price comes after we have measured up. Prices in Yorkshire and the Humber usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for splashbacks and tiling in Brighouse?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes around Brighouse

The housing mix across West Yorkshire includes stone-built terraces, back-to-back houses, 1930s semis and converted mill flats, so no two kitchen fits are quite alike. Back-to-backs often have a small kitchen at the front or in a corner of the living room, while 1930s semis usually have a separate kitchen at the rear.

Steep hill streets, terraces with steps up to the door and mill flats with booked lifts can all affect how long worktops and tall units are delivered. Most of West Yorkshire has soft water, drawn largely from Pennine reservoirs, so limescale is less of a concern for taps and appliances.

Do you need approval for splashbacks and tiling in Brighouse?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed mill buildings and stone terraces in conservation areas, including the Saltaire World Heritage Site, may need consent for new vents or changes to historic features.

Tips before you start

Hold a few of your chosen tiles against the wall in your Brighouse kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
If your West Yorkshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Brighouse

How much do splashbacks and tiling cost in Brighouse?

Guide prices in Brighouse are about £140 to £380 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Brighouse do you work in?

All of them. Our West Yorkshire coverage takes in the whole of Brighouse, including the HD6 postcode district, as well as surrounding towns such as Halifax. If you are unsure, send us your postcode.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Splashbacks and tiling in neighbouring towns

We also carry out splashbacks and tiling in these towns near Brighouse: