Splashbacks and tiling in Bournemouth

When do splashbacks and tiling make sense in Bournemouth?

Many people in Dorset choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

Some households in Dorset want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down. We work throughout Bournemouth (BH1, BH2, BH7 and BH10) and across the wider Dorset area.

What we cover for splashbacks and tiling in Bournemouth

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Free survey visit to check the walls, agree the layout and give an itemised quote
Full-height or feature tiling behind the hob, sink or open shelving
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Tiled splashbacks between the worktop and wall units, set out from a centre line
Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop

Splashbacks and tiling prices in Bournemouth

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Bournemouth kitchen. Prices across the South West are broadly in line with UK averages.

Splashbacks and tiling prices in Bournemouth
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£410
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£310–£820
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£260–£620
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

House types around Bournemouth and what they mean for a kitchen

The housing mix across Dorset includes thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows, so no two kitchen fits are quite alike. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.

Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult. Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help.

Regulations for kitchen work in Bournemouth

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.

Worth knowing before the fit

Hold a few of your chosen tiles against the wall in your Bournemouth kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.

Questions about splashbacks and tiling in Bournemouth

How much do splashbacks and tiling cost in Bournemouth?

Splashbacks and tiling in Bournemouth typically cost £150 to £410 including VAT for a tiled splashback, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Bournemouth do you work in?

All of them. Our Dorset coverage takes in the whole of Bournemouth, including the BH1, BH2, BH7 and BH10 postcode districts, as well as surrounding towns such as Christchurch. If you are unsure, send us your postcode.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Nearby places we cover

Neighbouring towns where we offer splashbacks and tiling: