Splashbacks and tiling in Borehamwood

Who usually needs splashbacks and tiling in Borehamwood?

When a Borehamwood kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit.

If your Borehamwood home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from. Kitchens in every part of Borehamwood are covered, and the survey visit is free wherever you are in Hertfordshire.

What we cover for splashbacks and tiling in Borehamwood

After the survey visit we write the scope down. For splashbacks and tiling in Borehamwood it usually covers:

Stone upstands and splashbacks templated and fitted alongside a stone worktop
Old tiles removed and walls prepared, patched or boarded where needed
Socket and switch plates refitted by an electrician once the tiling is finished
Full-height or feature tiling behind the hob, sink or open shelving
Free survey visit to check the walls, agree the layout and give an itemised quote
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint

Guide prices for splashbacks and tiling in Borehamwood

As a starting point for Borehamwood, these ranges include VAT at 20% and allow for typical labour costs in the East of England. Labour in the East of England generally costs more than the UK average, which lifts these ranges a little.

Guide prices for splashbacks and tiling in Borehamwood
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£160–£430
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£320–£860
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£270–£650
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Borehamwood homes

You will find 1930s semis, post-war new town houses, Victorian terraces and new-build estates throughout Hertfordshire. Stevenage and Hemel Hempstead new-town houses often have a small galley, while 1930s semis tend to have a narrow kitchen beside the dining room.

Hertfordshire's water is very hard, mostly drawn from chalk, so limescale on taps and boiling water taps is common and a softener or filter is worth considering. Commuter-town streets often have tight parking, and estate houses with shared parking courts can mean carrying units some distance to the front door.

Do you need approval for splashbacks and tiling in Borehamwood?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

A kitchen fit needs no planning permission, but listed buildings and conservation areas, including parts of St Albans and Welwyn Garden City, may need consent for external vents.

Tips before you start

Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Borehamwood home, as cutting dust and adhesive travel further than you expect.
Ask to see where the tiling will start before the first row goes on in your Borehamwood kitchen, so narrow cut tiles end up in corners rather than on show.
Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.

Questions about splashbacks and tiling in Borehamwood

How much do splashbacks and tiling cost in Borehamwood?

Splashbacks and tiling in Borehamwood typically cost £160 to £430 including VAT for a tiled splashback, based on prices in the East of England. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Borehamwood?

Yes. We work across Borehamwood, including the WD6 postcode district, and nearby towns such as Barnet and Bushey. Book a free survey visit and we will arrange a time that suits you.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Splashbacks and tiling near Borehamwood

The same service is available a short drive from Borehamwood, including: