Splashbacks and tiling in Banstead

Thinking about splashbacks and tiling in Banstead?

Many people in Surrey choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

Some households in Surrey want tiling taken up to the ceiling behind a range cooker or open shelving, turning one whole wall into a practical feature that is easy to wipe down. Kitchens in every part of Banstead are covered, and the survey visit is free wherever you are in Surrey.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old tiles removed and walls prepared, patched or boarded where needed
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Full-height or feature tiling behind the hob, sink or open shelving
Socket and switch plates refitted by an electrician once the tiling is finished
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Tiled splashbacks between the worktop and wall units, set out from a centre line

Guide prices for splashbacks and tiling in Banstead

As a starting point for Banstead, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for splashbacks and tiling in Banstead
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£170–£460
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£340–£920
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£290–£690
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

What kind of kitchens do we fit in Banstead?

Typical homes in this part of Surrey include 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day. Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering.

Building regulations, electrics and gas in Banstead

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Getting the most from your splashbacks and tiling

Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Choosing stone worktops for a Banstead kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Hold a few of your chosen tiles against the wall in your Banstead kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.

Questions about splashbacks and tiling in Banstead

How much do splashbacks and tiling cost in Banstead?

For a tiled splashback, budget around £170 to £460 including VAT in Banstead. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Can you measure up in Banstead before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Banstead. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Splashbacks and tiling near Banstead

The same service is available a short drive from Banstead, including: