Splashbacks and tiling · Greater Manchester
Splashbacks and tiling in Ashton-in-Makerfield
Whether your Ashton-in-Makerfield kitchen is a narrow galley or an open-plan room, splashbacks and tiling follow the same careful order: survey, written scope, fit and a final check together.
When do splashbacks and tiling make sense in Ashton-in-Makerfield?
If your Ashton-in-Makerfield home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.
Landlords around Greater Manchester often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. Our Greater Manchester coverage reaches every part of Ashton-in-Makerfield (WN4) and out towards Golborne.
What do splashbacks and tiling in Ashton-in-Makerfield include?
After the survey visit we write the scope down. For splashbacks and tiling in Ashton-in-Makerfield it usually covers:
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Socket and switch plates refitted by an electrician once the tiling is finished
- Full-height or feature tiling behind the hob, sink or open shelving
- Old tiles removed and walls prepared, patched or boarded where needed
- Free survey visit to check the walls, agree the layout and give an itemised quote
How much do splashbacks and tiling cost in Ashton-in-Makerfield?
Typical splashbacks and tiling prices for homes in Ashton-in-Makerfield, including VAT and adjusted for the North West. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £140–£380 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £280–£760 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £240–£570 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
Fitting kitchens in older and newer Ashton-in-Makerfield homes
The housing mix across Greater Manchester includes Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, so no two kitchen fits are quite alike. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.
Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in. Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner.
What rules apply to splashbacks and tiling in Ashton-in-Makerfield?
Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.
Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.
Planning ahead
- If your Greater Manchester kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
- Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
- Ask to see where the tiling will start before the first row goes on in your Ashton-in-Makerfield kitchen, so narrow cut tiles end up in corners rather than on show.
- Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.
Questions about splashbacks and tiling in Ashton-in-Makerfield
How much do splashbacks and tiling cost in Ashton-in-Makerfield?
For a tiled splashback, budget around £140 to £380 including VAT in Ashton-in-Makerfield. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.
Can you measure up in Ashton-in-Makerfield before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Ashton-in-Makerfield. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
When are splashbacks fitted during a kitchen installation?
Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.
Can you tile over existing kitchen tiles?
Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.
Can a glass splashback go behind a gas hob?
Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.
Splashbacks and tiling in neighbouring towns
Neighbouring towns where we offer splashbacks and tiling:
- Splashbacks and tiling in Golborne
- Splashbacks and tiling in Newton-le-Willows
- Splashbacks and tiling in St Helens
- Splashbacks and tiling in Wigan
- Splashbacks and tiling in Hindley
- Splashbacks and tiling in Leigh
- Splashbacks and tiling across Greater Manchester
Other kitchen work in Ashton-in-Makerfield
- Kitchen worktop fitting in Ashton-in-Makerfield
- Fit-only kitchen fitting in Ashton-in-Makerfield
- Kitchen lighting in Ashton-in-Makerfield
- Kitchen underfloor heating in Ashton-in-Makerfield
- Kitchen electrics in Ashton-in-Makerfield
- Kitchen refurbishment in Ashton-in-Makerfield
- All kitchen services in Ashton-in-Makerfield