Kitchen Installers UK
0800 088 6341 Get a guide price

Sink and tap installation · England

Sink and tap installation in the West Midlands

Homeowners and landlords across the West Midlands can book us for sink and tap installation: inset, undermount and ceramic sinks and kitchen taps fitted, including boiling water taps.

Guide price£150 to £1,000
Towns covered21 towns, including Birmingham
TimescaleHalf a day to 1 day
Get a guide price Book a free survey visit
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

Is sink and tap installation right for your West Midlands kitchen?

Some West Midlands households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size.

Landlords in the West Midlands often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap.

What does sink and tap installation in the West Midlands include?

Your written quote lists everything included. For sink and tap installation, that normally means:

  • New sink fitted, sealed and connected to the existing supplies and waste
  • Isolation valves on the hot and cold supplies, with flexible tap tails connected
  • Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
  • Inset sink cut-outs made on site in laminate and wood worktops
  • Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
  • Boiling water tap fitted with its tank, filter and power supply in the cupboard
  • Sink moved to a new position with new supply and waste runs
  • Every joint leak tested, with water flow and drainage checked before handover

How much does sink and tap installation cost in the West Midlands?

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. For the West Midlands, these ranges are close to the national figures.

How much does sink and tap installation cost in the West Midlands?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£200–£400
Boiling water tap installedTank under the sink, filter and power supply£150–£350
Sink moved to a new positionNew supplies and waste run£400–£1,000
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes across the West Midlands

Across the West Midlands you will often find Victorian terraces, 1930s semis, post-war council-built houses and post-war flats and maisonettes, and each shapes the kitchen differently. Victorian terraces often have a long galley behind the back room, while 1930s semis across Birmingham and the Black Country tend to have a small kitchen at the rear.

Birmingham's water is relatively soft, while much of the Black Country and Coventry is harder, so check your supplier's hardness figure before choosing a filter. Busy terraced streets, permit parking near town centres and blocks with shared lifts can each affect delivery times and how worktops reach the kitchen.

Many 1930s semis have a small kitchen beside a separate dining room, and opening them into one space is a common project. In a Victorian terrace, the galley often leads to a rear bathroom, so changes may involve plumbing as well as units.

Rules for sink and tap installation in the West Midlands

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas and listed buildings, including parts of Birmingham and Solihull, may need consent for new vents, and flat owners usually need the freeholder's consent first.

Before you start

  • Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
  • An undermount sink in a stone worktop is cut and polished by the fabricator, so choose the sink before the worktops are templated.
  • If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.
  • Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
  • Before buying a boiling water tap for your West Midlands home, check its minimum water pressure and how much space it needs in the sink cupboard.
  • Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.

Questions about sink and tap installation in the West Midlands

How much does sink and tap installation cost in the West Midlands?

For plumbing in a new sink and tap, budget around £200 to £400 including VAT in the West Midlands. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Do you cover the whole of the West Midlands?

Yes. We carry out sink and tap installation across the West Midlands, including Birmingham, Coventry, Wolverhampton and Dudley. Every job starts with a free survey visit and an itemised written quote.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Sink and tap installation in towns across the West Midlands

Choose a town for local guide prices and postcode coverage:

Sink and tap installation in nearby areas

Free survey visit

Book a free survey visit in the West Midlands

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price