Sink and tap installation in Shepherds Bush

Why sink and tap installation for a Shepherds Bush home?

Plenty of people in Shepherds Bush replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen.

If you are fitting new stone worktops in your Shepherds Bush kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator. Our Greater London coverage reaches every part of Shepherds Bush (W12) and out towards Notting Hill.

What we cover for sink and tap installation in Shepherds Bush

After the survey visit we write the scope down. For sink and tap installation in Shepherds Bush it usually covers:

New sink fitted, sealed and connected to the existing supplies and waste
Sink moved to a new position with new supply and waste runs
Every joint leak tested, with water flow and drainage checked before handover
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Inset sink cut-outs made on site in laminate and wood worktops
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections

Sink and tap installation prices in Shepherds Bush

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Shepherds Bush kitchen. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Sink and tap installation prices in Shepherds Bush
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£260–£520
Boiling water tap installedTank under the sink, filter and power supply	£200–£460
Sink moved to a new positionNew supplies and waste run	£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Local homes and their kitchens

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Shepherds Bush

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book sink and tap installation in Shepherds Bush

Choose the sink before stone worktops are templated in your Shepherds Bush kitchen, so the fabricator can cut and polish the undermount opening to suit it.
Ask whether a boiling water tap for your kitchen in Greater London needs a filter, how often it should be changed and where it will sit in the cupboard.
Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Shepherds Bush

How much does sink and tap installation cost in Shepherds Bush?

For plumbing in a new sink and tap, budget around £260 to £520 including VAT in Shepherds Bush. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you cover all of Shepherds Bush?

Yes. We work across Shepherds Bush, including the W12 postcode district, and nearby towns such as Notting Hill and Bayswater. Book a free survey visit and we will arrange a time that suits you.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Sink and tap installation in neighbouring towns

Close to Shepherds Bush? We cover these nearby towns too: