Sink and tap installation in Romford

Is sink and tap installation right for your Romford kitchen?

If you are fitting new stone worktops in your Romford kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator.

If a new dishwasher or washing machine is going next to the sink in your Romford home, the trap and waste connections usually need changing as well. We cover all of Romford, including the RM1 postcode district, and travel out to neighbouring towns across Greater London.

What does the job involve?

Here is what usually goes into sink and tap installation, adjusted to your Romford kitchen after we have measured it:

Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Every joint leak tested, with water flow and drainage checked before handover
Inset sink cut-outs made on site in laminate and wood worktops
Sink moved to a new position with new supply and waste runs
Boiling water tap fitted with its tank, filter and power supply in the cupboard

Sink and tap installation prices in Romford

Typical sink and tap installation prices for homes in Romford, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Sink and tap installation prices in Romford
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£260–£520
Boiling water tap installedTank under the sink, filter and power supply	£200–£460
Sink moved to a new positionNew supplies and waste run	£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes around Romford

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Romford

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book sink and tap installation in Romford

Before buying a boiling water tap for your Romford home, check its minimum water pressure and how much space it needs in the sink cupboard.
Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Find the stopcock in your Romford home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.

Questions about sink and tap installation in Romford

How much does sink and tap installation cost in Romford?

Guide prices in Romford are about £260 to £520 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Romford do you work in?

All of them. Our Greater London coverage takes in the whole of Romford, including the RM1 postcode district, as well as surrounding towns such as Hornchurch. If you are unsure, send us your postcode.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Sink and tap installation near Romford

The same service is available a short drive from Romford, including: