Kitchen Installers UK

Sink and tap installation · Greater London

Sink and tap installation in Palmers Green

From the survey to handover, sink and tap installation in Palmers Green is run by us as one job, with the fitters and trades booked in the right order.

Guide price£200 to £1,300
Postcodes includeN13 and N14
TimescaleHalf a day to 1 day
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

Thinking about sink and tap installation in Palmers Green?

People in Palmers Green with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later.

Some Palmers Green households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size. Homes right across Palmers Green are covered, as are nearby places such as Wood Green, Tottenham and the villages in between.

What does sink and tap installation in Palmers Green include?

The exact scope is agreed after the survey, but a typical job in Palmers Green covers:

  • New sink fitted, sealed and connected to the existing supplies and waste
  • Boiling water tap fitted with its tank, filter and power supply in the cupboard
  • Sink moved to a new position with new supply and waste runs
  • Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
  • Every joint leak tested, with water flow and drainage checked before handover
  • Inset sink cut-outs made on site in laminate and wood worktops

How much does sink and tap installation cost in Palmers Green?

Typical sink and tap installation prices for homes in Palmers Green, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in London generally costs more than the UK average, which lifts these ranges a little.

How much does sink and tap installation cost in Palmers Green?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£260–£520
Boiling water tap installedTank under the sink, filter and power supply£200–£460
Sink moved to a new positionNew supplies and waste run£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

What kind of kitchens do we fit in Palmers Green?

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Palmers Green

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Getting the most from your sink and tap installation

  • Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
  • Find the stopcock in your Palmers Green home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
  • For a ceramic farmhouse-style sink in your Palmers Green kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
  • If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.

Questions about sink and tap installation in Palmers Green

How much does sink and tap installation cost in Palmers Green?

Guide prices in Palmers Green are about £260 to £520 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Palmers Green?

Yes. We work across Palmers Green, including the N13 and N14 postcode districts, and nearby towns such as Wood Green and Tottenham. Book a free survey visit and we will arrange a time that suits you.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Also covering nearby towns

We also carry out sink and tap installation in these towns near Palmers Green:

Other kitchen work in Palmers Green

Free survey visit

Book a free survey visit in Palmers Green

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price