Sink and tap installation · Argyll and Bute
Sink and tap installation in Oban
Sink and tap installation for Oban homes: inset, undermount and ceramic sinks and kitchen taps fitted, including boiling water taps. Every job starts with a free survey visit and a written quote.
Is sink and tap installation right for your Oban kitchen?
If a new dishwasher or washing machine is going next to the sink in your Oban home, the trap and waste connections usually need changing as well.
An Oban kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run. Our Argyll and Bute coverage reaches every part of Oban (PA34) and out towards Dunoon.
What is in a typical job?
The exact scope is agreed after the survey, but a typical job in Oban covers:
- Boiling water tap fitted with its tank, filter and power supply in the cupboard
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- New sink fitted, sealed and connected to the existing supplies and waste
- Every joint leak tested, with water flow and drainage checked before handover
What does sink and tap installation cost in Oban?
These guide ranges include VAT at 20% and are adjusted for prices in Scotland. We confirm your price in writing after a free survey visit. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £190–£380 |
| Boiling water tap installedTank under the sink, filter and power supply | £140–£330 |
| Sink moved to a new positionNew supplies and waste run | £380–£940 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
Kitchens in homes around Oban
Typical homes in this part of Argyll and Bute include Victorian villas, whitewashed cottages, tenement flats and post-war bungalows. Victorian villas in Dunoon and Oban often have a separate scullery and a larger kitchen, while cottages and bungalows tend to have a compact room at the back.
Soft water is usual across Argyll and Bute, so limescale is rarely a concern, though rural homes on private supplies may need their own filtering. Long single-track roads are common, and some mainland addresses are quickest reached by ferry, so delivery dates, vehicle size and worktop lengths need planning around timetables and weather.
What rules apply to sink and tap installation in Oban?
In Scotland, replacing a sink and tap does not need a building warrant, but water fittings should meet Scottish Water's byelaws. Changing how waste water is discharged, such as a new connection to an underground drain, needs a warrant first. Power for a boiling water tap does not normally need a warrant, but it must meet the building standards and BS 7671, and you should receive a certificate.
Parts of Cowal lie within Loch Lomond and The Trossachs National Park, and listed buildings or conservation areas may need consent for a new external vent.
Tips before you start
- Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
- Before buying a boiling water tap for your Oban home, check its minimum water pressure and how much space it needs in the sink cupboard.
- Ask whether a boiling water tap for your kitchen in Argyll and Bute needs a filter, how often it should be changed and where it will sit in the cupboard.
- If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.
Questions about sink and tap installation in Oban
How much does sink and tap installation cost in Oban?
Sink and tap installation in Oban typically costs £190 to £380 including VAT for plumbing in a new sink and tap, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Can you measure up in Oban before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Oban. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Can a dishwasher and washing machine drain through the sink waste?
Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.
Do I need isolation valves under my kitchen sink?
They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.
What is the difference between an inset and an undermount sink?
An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.
Also covering nearby towns
Neighbouring towns where we offer sink and tap installation: