Kitchen Installers UK

Sink and tap installation · Norfolk

Sink and tap installation in Norwich

Need sink and tap installation in Norwich? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.

Guide price£160 to £1,100
Postcodes includeNR2 and NR3
TimescaleHalf a day to 1 day
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

Thinking about sink and tap installation in Norwich?

People in Norwich with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later.

Landlords in Norfolk often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap. If your home is in Norwich or close by in East Dereham or Beccles, the same survey, quote and fitting process applies.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
  • Sink moved to a new position with new supply and waste runs
  • Inset sink cut-outs made on site in laminate and wood worktops
  • Isolation valves on the hot and cold supplies, with flexible tap tails connected
  • Every joint leak tested, with water flow and drainage checked before handover
  • Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed

How much does sink and tap installation cost in Norwich?

Typical sink and tap installation prices for homes in Norwich, including VAT and adjusted for the East of England. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the East of England usually run above the national guide, mainly because labour and parking cost more.

How much does sink and tap installation cost in Norwich?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£220–£430
Boiling water tap installedTank under the sink, filter and power supply£160–£380
Sink moved to a new positionNew supplies and waste run£430–£1,100
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

What kind of kitchens do we fit in Norwich?

In and around Norwich, homes range across flint and brick cottages, Victorian terraces, post-war bungalows and converted barns. Flint and brick cottages often have a small kitchen in a rear lean-to, while bungalows across the county usually have a square kitchen beside a separate dining room.

Rural roads, farm tracks and narrow coastal village streets can restrict delivery lorries, so long worktops may need a smaller vehicle or a planned drop-off. Norfolk's water is hard across most of the county, so limescale on taps and boiling water taps is common and a softener or filter can help.

Building regulations, electrics and gas in Norwich

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Homes within the Broads, listed cottages and conservation areas in market towns and coastal villages may need consent for a new external vent or alterations to historic features.

Practical advice for Norwich homeowners

  • Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
  • Ask whether a boiling water tap for your kitchen in Norfolk needs a filter, how often it should be changed and where it will sit in the cupboard.
  • Choose the sink before stone worktops are templated in your Norwich kitchen, so the fabricator can cut and polish the undermount opening to suit it.
  • If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.

Questions about sink and tap installation in Norwich

How much does sink and tap installation cost in Norwich?

Sink and tap installation in Norwich typically costs £220 to £430 including VAT for plumbing in a new sink and tap, based on prices in the East of England. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Norwich do you work in?

All of them. Our Norfolk coverage takes in the whole of Norwich, including the NR2 and NR3 postcode districts, as well as surrounding towns such as East Dereham. If you are unsure, send us your postcode.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Sink and tap installation near Norwich

We also carry out sink and tap installation in these towns near Norwich:

Combine sink and tap installation with other work

Free survey visit

Book a free survey visit in Norwich

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price