Kitchen Installers UK

Sink and tap installation · Greater London

Sink and tap installation in Harrow

Whether your Harrow kitchen is a narrow galley or an open-plan room, sink and tap installation follows the same careful order: survey, written scope, fit and a final check together.

Guide price£200 to £1,300
Postcodes includeHA2
TimescaleHalf a day to 1 day
A plumber connecting the tap tails under a new kitchen sink, with isolation valves and the waste trap in view

What prompts sink and tap installation in Harrow?

Plenty of people in Harrow replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen.

People in Harrow with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later. Kitchens in every part of Harrow are covered, and the survey visit is free wherever you are in Greater London.

What does the job involve?

Your written quote lists everything included. For sink and tap installation, that normally means:

  • Inset sink cut-outs made on site in laminate and wood worktops
  • Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
  • New sink fitted, sealed and connected to the existing supplies and waste
  • Sink moved to a new position with new supply and waste runs
  • Isolation valves on the hot and cold supplies, with flexible tap tails connected
  • Every joint leak tested, with water flow and drainage checked before handover

How much does sink and tap installation cost in Harrow?

Typical sink and tap installation prices for homes in Harrow, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in London usually run above the national guide, mainly because labour and parking cost more.

How much does sink and tap installation cost in Harrow?
Typical projectGuide price
Sink and tap plumbed inIsolation valves, waste and trap£260–£520
Boiling water tap installedTank under the sink, filter and power supply£200–£460
Sink moved to a new positionNew supplies and waste run£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricatorPriced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

What kind of kitchens do we fit in Harrow?

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Harrow

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

  • Choose the sink before stone worktops are templated in your Harrow kitchen, so the fabricator can cut and polish the undermount opening to suit it.
  • Ask whether a boiling water tap for your kitchen in Greater London needs a filter, how often it should be changed and where it will sit in the cupboard.
  • Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
  • Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Harrow

How much does sink and tap installation cost in Harrow?

Sink and tap installation in Harrow typically costs £260 to £520 including VAT for plumbing in a new sink and tap, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Harrow?

Yes. We work across Harrow, including the HA2 postcode district, and nearby towns such as Wealdstone and Sudbury, Greater London. Book a free survey visit and we will arrange a time that suits you.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Nearby places we cover

Neighbouring towns where we offer sink and tap installation:

Other kitchen work in Harrow

Free survey visit

Book a free survey visit in Harrow

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price