Sink and tap installation in Gloucester

Why do people in Gloucester choose sink and tap installation?

If a new dishwasher or washing machine is going next to the sink in your Gloucester home, the trap and waste connections usually need changing as well.

A Gloucester kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run. Kitchens in every part of Gloucester are covered, and the survey visit is free wherever you are in Gloucestershire.

What does sink and tap installation in Gloucester include?

After the survey visit we write the scope down. For sink and tap installation in Gloucester it usually covers:

Boiling water tap fitted with its tank, filter and power supply in the cupboard
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Sink moved to a new position with new supply and waste runs
New sink fitted, sealed and connected to the existing supplies and waste
Inset sink cut-outs made on site in laminate and wood worktops
Isolation valves on the hot and cold supplies, with flexible tap tails connected

Guide prices for sink and tap installation in Gloucester

As a starting point for Gloucester, these ranges include VAT at 20% and allow for typical labour costs in the South West. For the South West, these ranges are close to the national figures.

Guide prices for sink and tap installation in Gloucester
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£210–£410
Boiling water tap installedTank under the sink, filter and power supply	£150–£360
Sink moved to a new positionNew supplies and waste run	£410–£1,000
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Fitting kitchens in older and newer Gloucester homes

The housing mix across Gloucestershire includes cotswold stone cottages, Regency townhouses, Victorian terraces and post-war estate houses, so no two kitchen fits are quite alike. Cotswold stone cottages often have a small kitchen in a rear extension, while Regency townhouses in Cheltenham may have a long kitchen at garden level or in a former basement.

Hard water is the norm across most of Gloucestershire, so expect limescale on taps and appliances and think about a filter for a boiling water tap. Stone villages with narrow lanes and limited parking can make deliveries slow, and townhouse flats over several floors may mean carrying units up stairs.

Do you need approval for sink and tap installation in Gloucester?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed stone cottages, Cheltenham's Regency terraces and homes in conservation areas may need consent before new vents are cut or historic features are removed.

Planning ahead

Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
Before buying a boiling water tap for your Gloucester home, check its minimum water pressure and how much space it needs in the sink cupboard.
Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.

Questions about sink and tap installation in Gloucester

How much does sink and tap installation cost in Gloucester?

Guide prices in Gloucester are about £210 to £410 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Gloucester do you work in?

All of them. Our Gloucestershire coverage takes in the whole of Gloucester, including the GL1 postcode district, as well as surrounding towns such as Cheltenham. If you are unsure, send us your postcode.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Sink and tap installation in neighbouring towns

We also carry out sink and tap installation in these towns near Gloucester: