Sink and tap installation · Scotland
Sink and tap installation in Glasgow
If you need sink and tap installation anywhere in Glasgow, we survey the kitchen, agree the scope with you and book every trade through to handover.
Why do people in Glasgow choose sink and tap installation?
Some Glasgow households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size.
Homeowners across Glasgow adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in.
What does sink and tap installation in Glasgow include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- New sink fitted, sealed and connected to the existing supplies and waste
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Inset sink cut-outs made on site in laminate and wood worktops
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Boiling water tap fitted with its tank, filter and power supply in the cupboard
- Sink moved to a new position with new supply and waste runs
- Every joint leak tested, with water flow and drainage checked before handover
How much does sink and tap installation cost in Glasgow?
These guide ranges include VAT at 20% and are adjusted for prices in Edinburgh and Glasgow. We confirm your price in writing after a free survey visit. Costs in Edinburgh and Glasgow sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £200–£410 |
| Boiling water tap installedTank under the sink, filter and power supply | £150–£360 |
| Sink moved to a new positionNew supplies and waste run | £410–£1,000 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
Kitchens in homes across Glasgow
Across Glasgow you will often find sandstone tenement flats, Victorian terraces and villas, four-in-a-block flats and post-war high-rise flats, and each shapes the kitchen differently. Tenement flats often have a kitchen off the hall, sometimes with an old bed recess, while four-in-a-block flats tend to have a narrow galley at the back.
Glasgow's mains water is soft, much of it from Loch Katrine, so limescale is rarely a problem and taps and boiling water taps stay cleaner. Tenement closes and common stairs mean carrying units by hand, often to upper floors, and permit parking near the door may need arranging for delivery day.
Tenement kitchens often have high ceilings and a former bed recess, which can take tall units, a fridge freezer or a small dining nook. Four-in-a-block flats and ex-council houses more often need a full refit with new wiring, better storage and a more practical layout.
Rules for sink and tap installation in Glasgow
In Scotland, replacing a sink and tap does not need a building warrant, but water fittings should meet Scottish Water's byelaws. Changing how waste water is discharged, such as a new connection to an underground drain, needs a warrant first. Power for a boiling water tap does not normally need a warrant, but it must meet the building standards and BS 7671, and you should receive a certificate.
Many of the city's tenement streets, including much of the West End, are conservation areas, so a new external vent may need consent, and common walls involve neighbours.
Before you start
- Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
- Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.
- Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
- Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
- Before buying a boiling water tap for your Glasgow home, check its minimum water pressure and how much space it needs in the sink cupboard.
- Find the stopcock in your Glasgow home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
Questions about sink and tap installation in Glasgow
How much does sink and tap installation cost in Glasgow?
Sink and tap installation in Glasgow typically costs £200 to £410 including VAT for plumbing in a new sink and tap, based on prices in Edinburgh and Glasgow. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Glasgow?
Yes. We carry out sink and tap installation across Glasgow. Every job starts with a free survey visit and an itemised written quote.
What do I need for a boiling water tap?
A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.
Can a dishwasher and washing machine drain through the sink waste?
Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.
What is the difference between an inset and an undermount sink?
An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.