Sink and tap installation in Canning Town

Why sink and tap installation for a Canning Town home?

Homeowners across Greater London adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in.

If you are fitting new stone worktops in your Canning Town kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator. We cover all of Canning Town, including the E16 postcode district, and travel out to neighbouring towns across Greater London.

What is in a typical job?

Here is what usually goes into sink and tap installation, adjusted to your Canning Town kitchen after we have measured it:

Inset sink cut-outs made on site in laminate and wood worktops
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Sink moved to a new position with new supply and waste runs
New sink fitted, sealed and connected to the existing supplies and waste
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Every joint leak tested, with water flow and drainage checked before handover

Sink and tap installation prices in Canning Town

Typical sink and tap installation prices for homes in Canning Town, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Sink and tap installation prices in Canning Town
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£260–£520
Boiling water tap installedTank under the sink, filter and power supply	£200–£460
Sink moved to a new positionNew supplies and waste run	£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Fitting kitchens in older and newer Canning Town homes

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to sink and tap installation in Canning Town?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
For a ceramic farmhouse-style sink in your Canning Town kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Canning Town

How much does sink and tap installation cost in Canning Town?

Sink and tap installation in Canning Town typically costs £260 to £520 including VAT for plumbing in a new sink and tap, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Canning Town do you work in?

All of them. Our Greater London coverage takes in the whole of Canning Town, including the E16 postcode district, as well as surrounding towns such as West Ham. If you are unsure, send us your postcode.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Nearby places we cover

The same service is available a short drive from Canning Town, including: