Sink and tap installation in Boston

Why do people in Boston choose sink and tap installation?

If you are fitting new stone worktops in your Boston kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator.

People in Boston with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later. If your home is in Boston or close by in Spalding or Sleaford, the same survey, quote and fitting process applies.

What we cover for sink and tap installation in Boston

The exact scope is agreed after the survey, but a typical job in Boston covers:

Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Inset sink cut-outs made on site in laminate and wood worktops
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Every joint leak tested, with water flow and drainage checked before handover
Sink moved to a new position with new supply and waste runs

What does sink and tap installation cost in Boston?

Use these ranges to plan your budget. They include VAT, reflect costs in the East Midlands, and are firmed up once we have seen your Boston kitchen. For the East Midlands, these ranges are close to the national figures.

What does sink and tap installation cost in Boston?
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£190–£390
Boiling water tap installedTank under the sink, filter and power supply	£150–£340
Sink moved to a new positionNew supplies and waste run	£390–£970
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Fitting kitchens in older and newer Boston homes

You will find Victorian terraces, post-war council-built houses, farmhouses and seaside bungalows throughout Lincolnshire. Expect a narrow back kitchen in many Victorian terraces in Lincoln and Grimsby, while bungalows on the coast and in villages usually have a simple square kitchen.

Lincolnshire's mains water is mostly hard, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter is a sensible addition. Long rural roads and farm tracks can affect delivery times and vehicle size, while terraced streets in the towns may have little parking near the front door.

Do you need approval for sink and tap installation in Boston?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Fitting a kitchen needs no planning permission, but listed buildings in historic town centres and homes in conservation areas may need consent for new vents.

Tips before you start

Ask whether a boiling water tap for your kitchen in Lincolnshire needs a filter, how often it should be changed and where it will sit in the cupboard.
For a ceramic farmhouse-style sink in your Boston kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Choose the sink before stone worktops are templated in your Boston kitchen, so the fabricator can cut and polish the undermount opening to suit it.
Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.

Questions about sink and tap installation in Boston

How much does sink and tap installation cost in Boston?

Guide prices in Boston are about £190 to £390 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Boston do you work in?

All of them. Our Lincolnshire coverage takes in the whole of Boston, including the PE21 postcode district, as well as surrounding towns such as Spalding. If you are unsure, send us your postcode.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Sink and tap installation near Boston

Close to Boston? We cover these nearby towns too: