Kitchen plumbing in Croydon

Thinking about kitchen plumbing in Croydon?

If your Croydon home has a solid concrete ground floor, a new sink or appliance position may mean cutting a channel for the waste, which is worth planning before the units arrive.

Plenty of Croydon kitchens still have the sink where it was put decades ago, and moving it under the window or into an island is a common reason to call a plumber. Homes right across Croydon are covered, as are nearby places such as South Croydon, South Norwood and the villages in between.

What we cover for kitchen plumbing in Croydon

The exact scope is agreed after the survey, but a typical job in Croydon covers:

Isolation valves on each tap and appliance feed for quick shut-off
Redundant pipes cut back to the live supply and capped, then a full leak check
Radiators moved or replaced so they clear the new units
Dishwasher and washing machine supplies, with waste connections through suitable traps
A cold feed for a boiling water tap tank or a fridge with a water dispenser
Waste pipes laid to a steady fall, with an access point for clearing blockages

What does kitchen plumbing cost in Croydon?

The figures below are guide prices for Croydon, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Prices in London usually run above the national guide, mainly because labour and parking cost more.

What does kitchen plumbing cost in Croydon?
Typical project	Guide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout	£260–£650
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs	£520–£1,300
Waste run across a solid concrete floorChasing, pipework and reinstating the floor	£780–£2,000
Radiator moved or replacedDrain down, new pipework and refill	£320–£650

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

Fitting kitchens in older and newer Croydon homes

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Croydon

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

In a flat in Croydon, check your lease before moving the sink, as moving services usually needs the freeholder's written consent.
Ask for supplies and wastes to be positioned to suit each appliance's instructions, so hoses are short and do not kink.
Ask for an access point on the waste near the sink, so a future blockage can be cleared without taking a unit out.
If a radiator sits where new units will go, decide early whether to move it, swap it for a tall one or fit a plinth heater.

Questions about kitchen plumbing in Croydon

How much does kitchen plumbing cost in Croydon?

Kitchen plumbing in Croydon typically costs £260 to £650 including VAT for connecting the sink, dishwasher and washing machine, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Croydon do you work in?

All of them. Our Greater London coverage takes in the whole of Croydon, including the CR0 and CR7 postcode districts, as well as surrounding towns such as South Croydon. If you are unsure, send us your postcode.

What happens to the old pipes during a kitchen refit?

Pipes that will no longer serve anything are cut back to the nearest live pipe and capped, rather than left as long dead ends behind the new units. Water sitting in an unused length of pipe can go stale, and a forgotten joint can leak where nobody will see it. Old wastes are removed or sealed so they cannot let drain smells back into the room.

What plumbing does a boiling water tap need?

A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.

Why should every appliance have an isolation valve?

An isolation valve lets you shut off the water to one tap or appliance without turning off the whole house. If a dishwasher hose splits or a tap needs a new cartridge, you turn a small screw or lever under the sink and the rest of the home keeps running. Valves are fitted on the hot and cold tap feeds and on each appliance supply.

Kitchen plumbing near Croydon

The same service is available a short drive from Croydon, including: