Kitchen installation in Oxford

Thinking about kitchen installation in Oxford?

If you have bought a home in Oxford with a small galley or a dated back kitchen, a new installation can make far better use of the same space.

Landlords and sellers across Oxfordshire often fit a new kitchen because it is one of the first rooms buyers and tenants judge a home by. We work throughout Oxford (OX1) and across the wider Oxfordshire area.

What is in a typical job?

Here is what usually goes into kitchen installation, adjusted to your Oxford kitchen after we have measured it:

Worktops cut, jointed and sealed, or templated for stone
Removal and disposal of the old kitchen, with gas and electrics made safe
First-fix electrics and plumbing for the new layout
Gas hobs connected only by Gas Safe registered engineers
Base, wall and tall units fixed, levelled and secured to the wall
Free survey visit, measurements and an itemised written quote

What should you budget for kitchen installation in Oxford?

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What should you budget for kitchen installation in Oxford?
Typical project	Guide price
Small kitchen, 5–10 units, fit onlyYour units fitted, laminate worktop, sink and appliance connections	£1,700–£2,900
Medium kitchen, 10–15 units, fit onlyAs above, for a typical family kitchen	£2,900–£4,000
Large kitchen, 15+ units or an island, fit onlyTall larders, island, more cut-outs and panels	£4,000–£5,200
Mid-range kitchen, supplied and fittedRigid units, quartz or solid wood worktops, integrated appliances, fitting and the usual trades	£20,500–£40,000

Fit-only guide ranges cover labour for units, laminate worktops and standard connections; stone worktops, new circuits, moved services, tiling, flooring and plastering are priced as separate lines. Prices include VAT at 20%.

Kitchens in homes around Oxford

In and around Oxford, homes range across cotswold stone cottages, Victorian terraces, 1930s semis and new-build estates. Oxford's Victorian terraces often have a narrow galley in the back addition, while stone cottages in market towns and villages tend to have small, low-ceilinged kitchens.

City streets with permit parking and narrow village lanes can both slow deliveries, so parking and the carry route for worktops are checked at the survey. Water across Oxfordshire is hard, so limescale on taps, kettles and boiling water taps is common, and a filter is worth planning in.

Do you need approval for kitchen installation in Oxford?

Fitting a new kitchen does not need planning permission in England. Listed building consent may be needed if the building is listed, and a new vent through the outside wall of a flat may need planning permission and the freeholder's consent. Electrical work must meet BS 7671, and new circuits or a new consumer unit are notifiable under Part P, so they are certified through a competent person scheme or building control. New extraction should be designed to Approved Document F rates (about 30 litres per second for a hood ducted outside), a refit should not leave ventilation worse than before, and only Gas Safe registered engineers may connect a gas hob.

Oxford's many listed buildings and conservation areas, along with Cotswold stone villages, may need consent before a new vent is cut or historic features are removed.

Tips before you start

Order stone worktops early in the plan, as templating can only happen once the base units are fixed.
Before you order a kitchen for your Oxford home, ask for a survey so the plan is checked against real measurements, not estimates.
If your house in Oxfordshire is older, ask for the walls to be checked for level; out-of-true walls change how units and worktops are scribed.
Decide where the sink, hob and dishwasher go early, because moving them later means repeating plumbing, electrics and tiling.

Questions about kitchen installation in Oxford

How much does kitchen installation cost in Oxford?

For a small kitchen of 5 to 10 units, fit only, budget around £1,700 to £2,900 including VAT in Oxford. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you work near Oxford as well?

Yes. As well as Oxford itself, we cover the rest of Oxfordshire and nearby towns such as Abingdon and Didcot. The process is the same wherever the kitchen is.

Do I need building regulations approval for a new kitchen?

Usually only for parts of the job. Fitting units does not need approval, but new electrical circuits are notifiable in England and Wales, removing a load-bearing wall needs approval everywhere, and in Scotland structural work needs a building warrant. Gas work must always be done by a Gas Safe registered engineer.

How long does it take to install a kitchen?

Most kitchens take three to twelve days on site to fit, depending on the number of units and whether services are moving. Allow one to three weeks overall once electrics, plumbing, tiling and flooring are included, plus one to two weeks between templating and fitting if you choose stone worktops.

Will you fit a kitchen I have bought myself?

Yes. We fit kitchens bought from any retailer, trade counter or online supplier, flat-pack or rigid. On the survey we check the plan, and before fitting we check the delivery against it. Missing or damaged parts are for the supplier to replace, and we tell you straight away so the fit can be re-planned.

Kitchen installation in neighbouring towns

Neighbouring towns where we offer kitchen installation: