Kitchen installation in Barnet

Thinking about kitchen installation in Barnet?

If you have bought a home in Barnet with a small galley or a dated back kitchen, a new installation can make far better use of the same space.

When a Barnet kitchen needs new electrics, plumbing and tiling as well as units, one contract keeps those trades in the right order. We cover all of Barnet, including the EN5 postcode district, and travel out to neighbouring towns across Greater London.

What does kitchen installation in Barnet include?

The exact scope is agreed after the survey, but a typical job in Barnet covers:

Base, wall and tall units fixed, levelled and secured to the wall
Worktops cut, jointed and sealed, or templated for stone
Free survey visit, measurements and an itemised written quote
Panels, plinths, cornice, splashback and a final check before handover
Removal and disposal of the old kitchen, with gas and electrics made safe
Sink, tap and integrated appliances fitted and connected

Kitchen installation prices in Barnet

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Kitchen installation prices in Barnet
Typical project	Guide price
Small kitchen, 5–10 units, fit onlyYour units fitted, laminate worktop, sink and appliance connections	£2,000–£3,200
Medium kitchen, 10–15 units, fit onlyAs above, for a typical family kitchen	£3,200–£4,600
Large kitchen, 15+ units or an island, fit onlyTall larders, island, more cut-outs and panels	£4,600–£5,800
Mid-range kitchen, supplied and fittedRigid units, quartz or solid wood worktops, integrated appliances, fitting and the usual trades	£23,500–£45,500

Fit-only guide ranges cover labour for units, laminate worktops and standard connections; stone worktops, new circuits, moved services, tiling, flooring and plastering are priced as separate lines. Prices include VAT at 20%.

Kitchens in homes around Barnet

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Barnet

Fitting a new kitchen does not need planning permission in England. Listed building consent may be needed if the building is listed, and a new vent through the outside wall of a flat may need planning permission and the freeholder's consent. Electrical work must meet BS 7671, and new circuits or a new consumer unit are notifiable under Part P, so they are certified through a competent person scheme or building control. New extraction should be designed to Approved Document F rates (about 30 litres per second for a hood ducted outside), a refit should not leave ventilation worse than before, and only Gas Safe registered engineers may connect a gas hob.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Keep the delivery note and plan together until the fit, so any missing parts can be reported to the supplier quickly.
If you live in a flat in Barnet, check building rules on working hours, lift protection and parking for the fitting van.
Check that your Barnet delivery can reach the kitchen: tall larder units and long worktops need clear access through doors and stairs.
Decide where the sink, hob and dishwasher go early, because moving them later means repeating plumbing, electrics and tiling.

Questions about kitchen installation in Barnet

How much does kitchen installation cost in Barnet?

Kitchen installation in Barnet typically costs £2,000 to £3,200 including VAT for a small kitchen of 5 to 10 units, fit only, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Barnet as well?

Yes. As well as Barnet itself, we cover the rest of Greater London and nearby towns such as East Barnet and Friern Barnet. The process is the same wherever the kitchen is.

Do I need building regulations approval for a new kitchen?

Usually only for parts of the job. Fitting units does not need approval, but new electrical circuits are notifiable in England and Wales, removing a load-bearing wall needs approval everywhere, and in Scotland structural work needs a building warrant. Gas work must always be done by a Gas Safe registered engineer.

What order does a kitchen installation follow?

The usual sequence is strip-out, any structural work, first-fix electrics and plumbing, plastering, base and wall units, worktops, second fix of sockets, sink, tap and appliances, then splashbacks, flooring and decorating. Some floors go down before the units and some after, depending on the floor type, which we agree at the survey.

How long does it take to install a kitchen?

Most kitchens take three to twelve days on site to fit, depending on the number of units and whether services are moving. Allow one to three weeks overall once electrics, plumbing, tiling and flooring are included, plus one to two weeks between templating and fitting if you choose stone worktops.

Nearby places we cover

We also carry out kitchen installation in these towns near Barnet: