Kitchen flooring · Scotland
Kitchen flooring in Renfrewshire and Inverclyde
If you need kitchen flooring anywhere in Renfrewshire and Inverclyde, we survey the kitchen, agree the scope with you and book every trade through to handover.
Who usually needs kitchen flooring in Renfrewshire and Inverclyde?
When underfloor heating is going into a Renfrewshire and Inverclyde kitchen, the floor finish is planned with it, so the heating, insulation and flooring build-up meet the doorways at the right height.
Families across Renfrewshire and Inverclyde often choose LVT for a kitchen because it is warmer and quieter underfoot than tiles and copes well with spills and dropped cups.
What does kitchen flooring in Renfrewshire and Inverclyde include?
The exact scope is agreed after the survey, but a typical job in Renfrewshire and Inverclyde covers:
- Free survey visit to check the subfloor, measure up and give an itemised quote
- Old coverings lifted and removed, with pre-2000 floor tiles checked for asbestos first
- Moisture checks on concrete floors and screeds before any floor finish is laid
- Levelling compound or a plywood overlay to give a flat, firm base
- LVT, sheet vinyl, porcelain or ceramic tiles, or engineered wood laid to suit the room
- Flooring run under appliance spaces so machines can be pulled out for servicing
- Underlay suited to the floor finish, the subfloor and any underfloor heating
- Threshold trims at doorways, with skirting, plinths and kickboards refitted
How much does kitchen flooring cost in Renfrewshire and Inverclyde?
The figures below are guide prices for Renfrewshire and Inverclyde, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Prices in Scotland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| LVT or vinyl, kitchen floorPreparation, underlay where needed and trims | £470–£1,400 |
| Porcelain or ceramic tiles, kitchen floorPreparation, adhesive, grout and trims | £850–£1,900 |
| Floor levelling or new plywood baseSo the floor finish and units sit flat | £280–£850 |
Guide prices are for a typical-sized kitchen floor, including preparation, adhesive or underlay and trims; the material you choose, open-plan floor areas and any levelling or plywood base are confirmed at the survey. Prices include VAT at 20%.
Kitchens in homes across Renfrewshire and Inverclyde
You will find sandstone tenement flats, Victorian villas, four-in-a-block flats and new-build estates throughout Renfrewshire and Inverclyde. Paisley and Greenock tenement flats often have a kitchen off the hall, while villas and newer homes in Newton Mearns tend to have larger kitchens with island space.
Water in Renfrewshire and Inverclyde is soft, which is kind to taps and appliances and keeps limescale on boiling water taps to a minimum. Steep streets in Greenock, tenement common stairs and four-in-a-block flats with outside stairs can all affect deliveries and worktop handling.
If your home is a tenement flat, the kitchen is often small with a high ceiling, and tall units or a high-level shelf make good use of the height. Villas and newer family homes tend to suit a supply-and-fit kitchen with an island, integrated appliances and a separate utility space.
Rules for kitchen flooring in Renfrewshire and Inverclyde
In Scotland, replacing a kitchen floor finish does not need a building warrant or planning permission. If you own a flat, check your title deeds and any deed of conditions, which may set rules on floor coverings or sound insulation; tenants should check their tenancy agreement. Electric underfloor heating must meet the building standards and BS 7671, so ask the electrician for a certificate. Listed buildings may need consent before original floors are removed.
Paisley and Greenock have conservation areas and listed buildings, so a new external vent may need consent, and tenement owners may need neighbours' agreement.
Before you start
- New screeds hold a lot of water and must be dry enough before most floors go down, so allow time and ask for a moisture reading.
- Floating floors such as click LVT or engineered boards should not be trapped under heavy fixed units or an island; follow the flooring maker's instructions.
- With underfloor heating, choose a floor finish, adhesive and underlay rated for it, and follow the makers' guidance on bringing the heating up to temperature.
- Decide early whether the floor runs under the units or stops at the plinths; it affects ordering quantities, plinth heights and how the kitchen is fitted.
- Keep pets and children off a newly tiled floor until the grout has set, and put felt pads on chair legs if your Renfrewshire and Inverclyde kitchen has LVT or wood.
- If your Renfrewshire and Inverclyde house was built before 2000 and still has old vinyl or thermoplastic tiles, have them tested for asbestos before anyone lifts or sands them.
Questions about kitchen flooring in Renfrewshire and Inverclyde
How much does kitchen flooring cost in Renfrewshire and Inverclyde?
Guide prices in Renfrewshire and Inverclyde are about £470 to £1,400 including VAT for an LVT or vinyl kitchen floor. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Renfrewshire and Inverclyde?
Yes. We carry out kitchen flooring across Renfrewshire and Inverclyde, including Paisley, Greenock, Newton Mearns and Renfrew. Every job starts with a free survey visit and an itemised written quote.
How long does it take to lay a kitchen floor?
Most kitchen floors take one to two days to lay once the base is ready. Add curing time if a levelling compound is used, which depends on the product and its thickness, and allow much longer for a new screed, which must be dry enough before most floors go down. Tiled floors also need the adhesive and grout to set before heavy use.
Should kitchen flooring go down before or after the units?
It depends on the floor. Tiles are often laid first, or at least run under the appliance spaces, so a dishwasher or fridge can be pulled out without catching on the edge. Floating floors such as click LVT or engineered boards usually go down after the units, up to the plinth line, so they are not trapped under heavy fixed cabinets. We follow the flooring maker's instructions.
Does my kitchen floor need levelling before new flooring?
Often, yes. Thin floors such as LVT and sheet vinyl show every dip and ridge underneath, and tiles can crack if the base flexes or is uneven. Concrete floors are usually smoothed with a levelling compound, while timber floorboards are normally overlaid with plywood screwed down at close centres. We check the floor at the survey and price any preparation as its own line.
Kitchen flooring in towns across Renfrewshire and Inverclyde
Choose a town for local guide prices and postcode coverage:
- Kitchen flooring in Paisley
- Kitchen flooring in Greenock
- Kitchen flooring in Newton Mearns
- Kitchen flooring in Renfrew
- Kitchen flooring in Barrhead
- Kitchen flooring in Johnstone
- Kitchen flooring in Erskine