Kitchen flooring in Gateshead

Who usually needs kitchen flooring in Gateshead?

When underfloor heating is going into a Gateshead kitchen, the floor finish is planned with it, so the heating, insulation and flooring build-up meet the doorways at the right height.

If your home in Tyne and Wear has suspended timber floorboards, a plywood overlay usually goes down first so tiles or LVT do not crack or show the board joints. Kitchens in every part of Gateshead are covered, and the survey visit is free wherever you are in Tyne and Wear.

What does kitchen flooring in Gateshead include?

Here is what usually goes into kitchen flooring, adjusted to your Gateshead kitchen after we have measured it:

Moisture checks on concrete floors and screeds before any floor finish is laid
Flooring run under appliance spaces so machines can be pulled out for servicing
Free survey visit to check the subfloor, measure up and give an itemised quote
Threshold trims at doorways, with skirting, plinths and kickboards refitted
Levelling compound or a plywood overlay to give a flat, firm base
Old coverings lifted and removed, with pre-2000 floor tiles checked for asbestos first

Kitchen flooring prices in Gateshead

The figures below are guide prices for Gateshead, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.

Kitchen flooring prices in Gateshead
Typical project	Guide price
LVT or vinyl, kitchen floorPreparation, underlay where needed and trims	£450–£1,400
Porcelain or ceramic tiles, kitchen floorPreparation, adhesive, grout and trims	£810–£1,800
Floor levelling or new plywood baseSo the floor finish and units sit flat	£270–£810

Guide prices are for a typical-sized kitchen floor, including preparation, adhesive or underlay and trims; the material you choose, open-plan floor areas and any levelling or plywood base are confirmed at the survey. Prices include VAT at 20%.

House types around Gateshead and what they mean for a kitchen

In and around Gateshead, homes range across tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

What rules apply to kitchen flooring in Gateshead?

A new kitchen floor in England needs no planning permission or building regulations approval. In a flat, check the lease first: leases often require a sound-reducing underlay, or forbid hard floors without the freeholder's consent. If electric underfloor heating goes under the new floor on a new circuit, that circuit is notifiable under Part P. In a listed building, removing historic floors may need listed building consent.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Getting the most from your kitchen flooring

Measure the gap under internal doors in your Gateshead home before choosing flooring; thicker tiles or an overlay may mean doors need trimming.
Let LVT or engineered wood acclimatise in the room for as long as the maker recommends before it is laid, with the heating at its normal setting.
Choose trims for each doorway at the survey, so the colour and height suit the floor in the next room of your Gateshead home as well as the kitchen.
Check the finished floor height at doorways, especially with tiles over a plywood overlay, so doors still swing and thresholds do not create a trip.

Questions about kitchen flooring in Gateshead

How much does kitchen flooring cost in Gateshead?

For an LVT or vinyl kitchen floor, budget around £450 to £1,400 including VAT in Gateshead. That reflects typical costs in the North East; we confirm the actual figure in writing once we have measured up.

Which parts of Gateshead do you work in?

All of them. Our Tyne and Wear coverage takes in the whole of Gateshead, including the NE8 postcode district, as well as surrounding towns such as Newcastle upon Tyne. If you are unsure, send us your postcode.

Is engineered wood a good choice for a kitchen floor?

It can be, but it needs more care than LVT or tiles. Engineered wood can swell or stain if water sits on it, so it is less suited to the areas around a sink or dishwasher, where leaks are most likely. If you choose it, pick a board the maker approves for kitchens, wipe spills promptly and keep the finish maintained.

Does my kitchen floor need levelling before new flooring?

Often, yes. Thin floors such as LVT and sheet vinyl show every dip and ridge underneath, and tiles can crack if the base flexes or is uneven. Concrete floors are usually smoothed with a levelling compound, while timber floorboards are normally overlaid with plywood screwed down at close centres. We check the floor at the survey and price any preparation as its own line.

Should kitchen flooring go down before or after the units?

It depends on the floor. Tiles are often laid first, or at least run under the appliance spaces, so a dishwasher or fridge can be pulled out without catching on the edge. Floating floors such as click LVT or engineered boards usually go down after the units, up to the plinth line, so they are not trapped under heavy fixed cabinets. We follow the flooring maker's instructions.

Nearby places we cover

Neighbouring towns where we offer kitchen flooring: