Kitchen electrics in Tooting

When do kitchen electrics make sense in Tooting?

If you are moving the hob to an island or swapping gas for induction in your Tooting home, the kitchen needs a new supply routed to the new cooking position.

When a Tooting kitchen is stripped back to bare walls, running new cables then costs far less than chasing them in after plastering and tiling. Tooting sits about 5 miles south of Westminster, and our Greater London coverage takes in everything in between.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

A dedicated circuit for an oven, range cooker or induction hob where needed
First-fix cables and back boxes run before plastering or boarding
Testing, the correct certificate, and notification of the work where it is required
Second fix of sockets, switches and appliance connections once tiling is done
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
Accessible isolation switches for integrated appliances, reachable without pulling units out

What do kitchen electrics cost in Tooting?

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

What do kitchen electrics cost in Tooting?
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£320–£650
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£650–£2,000
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£390–£910

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

House types around Tooting and what they mean for a kitchen

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Tooting

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

Expect the power to be off in parts of your Tooting home for a few hours on first-fix and second-fix days, and charge laptops and phones beforehand.
If you let a property in Greater London, keep the kitchen certificates with your electrical inspection report so the next inspector can see what changed.
Walk round your Tooting kitchen with the plan and mark where each small appliance will sit; the socket schedule is built from that list.
Ask for isolation switches for the dishwasher, fridge and washing machine to be reachable without moving an appliance or a unit.

Questions about kitchen electrics in Tooting

How much do kitchen electrics cost in Tooting?

For extra sockets or spurs on existing circuits, budget around £320 to £650 including VAT in Tooting. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Which parts of Tooting do you work in?

All of them. Our Greater London coverage takes in the whole of Tooting, including the SW17 postcode district, as well as surrounding towns such as Streatham. If you are unsure, send us your postcode.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Nearby places we cover

Neighbouring towns where we offer kitchen electrics: