Kitchen electrics in Swansea

Why kitchen electrics for a Swansea home?

Kitchens bought online often come with integrated appliances that need their own supplies and switches, so it pays to plan those for your Swansea kitchen before the units arrive.

When a Swansea kitchen is stripped back to bare walls, running new cables then costs far less than chasing them in after plastering and tiling. We cover all of Swansea, including the SA1 postcode district, and travel out to neighbouring towns across West Glamorgan.

What we cover for kitchen electrics in Swansea

Here is what usually goes into kitchen electrics, adjusted to your Swansea kitchen after we have measured it:

Testing, the correct certificate, and notification of the work where it is required
Supplies for the cooker hood, under-cabinet lights and a boiling water tap
First-fix cables and back boxes run before plastering or boarding
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
Accessible isolation switches for integrated appliances, reachable without pulling units out
Second fix of sockets, switches and appliance connections once tiling is done

Guide prices for kitchen electrics in Swansea

The figures below are guide prices for Swansea, including VAT and adjusted for typical costs across Wales. The fixed price comes after we have measured up. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for kitchen electrics in Swansea
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£230–£460
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£460–£1,400
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£280–£640

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Local homes and their kitchens

In and around Swansea, homes range across Victorian terraces, valley terraces, post-war council-built houses and seaside bungalows. Terraced houses in Swansea and Neath often have a narrow back kitchen, while post-war homes and bungalows tend to have a compact room that suits an L-shaped layout.

Mains water in West Glamorgan is generally soft, so limescale is less of a worry and taps and boiling water taps tend to stay cleaner. Steep hillside streets and terraces with steps to the door can make carrying worktops harder, so the delivery route is planned at the survey.

Do you need approval for kitchen electrics in Swansea?

Part P in Wales goes further than in England. As well as new circuits and consumer unit replacement, extending an existing circuit within a kitchen is notifiable, and a kitchen means any room or part of a room with a sink and food preparation facilities. So most kitchen electrics in Wales are notified, either by an electrician registered with a competent person scheme or through building control, and all of it must meet BS 7671.

If your home is listed or in a conservation area, including parts of Swansea and some Gower villages, a new external vent or changes to historic features may need consent.

Before you book kitchen electrics in Swansea

Walk round your Swansea kitchen with the plan and mark where each small appliance will sit; the socket schedule is built from that list.
Find your consumer unit and take a photo of it before the survey of your Swansea home, so the electrician can see straight away whether it has spare ways.
If you live in a flat in Swansea, find out where your consumer unit and meter are, as some sit in communal cupboards that need the managing agent's access.
Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.

Questions about kitchen electrics in Swansea

How much do kitchen electrics cost in Swansea?

For extra sockets or spurs on existing circuits, budget around £230 to £460 including VAT in Swansea. That reflects typical costs in Wales; we confirm the actual figure in writing once we have measured up.

Which parts of Swansea do you work in?

All of them. Our West Glamorgan coverage takes in the whole of Swansea, including the SA1 postcode district, as well as surrounding towns such as Neath. If you are unsure, send us your postcode.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

Nearby places we cover

The same service is available a short drive from Swansea, including: