Kitchen Installers UK

Kitchen electrics · England

Kitchen electrics in Merseyside

Our kitchen electrics work covers the whole of Merseyside, including Liverpool, Birkenhead and St Helens.

Guide price£240 to £1,400
Towns covered19 towns, including Liverpool
Timescale1 to 3 days, split between first fix and second fix
An electrician fixing a double socket to a newly plastered kitchen wall above the base units, before the tiling goes on

Is kitchen electrics right for your Merseyside kitchen?

Kitchens bought online often come with integrated appliances that need their own supplies and switches, so it pays to plan those for your Merseyside kitchen before the units arrive.

When a Merseyside kitchen is stripped back to bare walls, running new cables then costs far less than chasing them in after plastering and tiling.

What do kitchen electrics in Merseyside include?

After the survey visit we write the scope down. For kitchen electrics in Merseyside it usually covers:

  • A check of the consumer unit, existing circuits and earthing before the layout is fixed
  • Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
  • First-fix cables and back boxes run before plastering or boarding
  • A dedicated circuit for an oven, range cooker or induction hob where needed
  • Accessible isolation switches for integrated appliances, reachable without pulling units out
  • Supplies for the cooker hood, under-cabinet lights and a boiling water tap
  • Second fix of sockets, switches and appliance connections once tiling is done
  • Testing, the correct certificate, and notification of the work where it is required

How much do kitchen electrics cost in Merseyside?

The figures below are guide prices for Merseyside, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

How much do kitchen electrics cost in Merseyside?
Typical projectGuide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout£240–£480
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting£480–£1,400
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified£280–£660

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Kitchens in homes across Merseyside

Across Merseyside you will often find Victorian terraces, Victorian and Edwardian villas, 1930s semis and converted warehouse flats, and each shapes the kitchen differently. Two-up two-down terraces often have a small back kitchen off the living room, while 1930s semis tend to have a separate kitchen with space to open into a dining room.

Merseyside's mains water is soft, so limescale is rarely a big issue and taps, sinks and boiling water taps stay cleaner for longer. Terraced streets with back entries, city-centre flats with booked lifts and permit parking zones can all affect how and when a kitchen is delivered.

Knocking a small back kitchen through to the living room is a common way to make space for a table in a terrace. Large Victorian villas split into flats often mean fitting a full kitchen into one room, with shared services and stair access to plan around.

Rules for kitchen electrics in Merseyside

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Conservation areas and listed buildings are common in older parts of Liverpool and the Wirral, so a new vent on a visible wall may need consent.

Before you start

  • Check whether your consumer unit has spare ways and RCD protection; an older board may need upgrading before new circuits can be added.
  • Ask for isolation switches for the dishwasher, fridge and washing machine to be reachable without moving an appliance or a unit.
  • Decide on lighting, island power and any boiling water tap before plastering, as cables are far harder to add after tiling.
  • Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.
  • Ask for USB sockets or extra doubles near the breakfast bar at first fix; changing a faceplate later is easy, adding a new box is not.
  • Find your consumer unit and take a photo of it before the survey of your Merseyside home, so the electrician can see straight away whether it has spare ways.

Questions about kitchen electrics in Merseyside

How much do kitchen electrics cost in Merseyside?

For extra sockets or spurs on existing circuits, budget around £240 to £480 including VAT in Merseyside. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.

Do you cover the whole of Merseyside?

Yes. We carry out kitchen electrics across Merseyside, including Liverpool, Birkenhead, St Helens and Southport. Every job starts with a free survey visit and an itemised written quote.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Kitchen electrics in towns across Merseyside

Choose a town for local guide prices and postcode coverage:

Kitchen electrics in nearby areas

Free survey visit

Book a free survey visit in Merseyside

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price