Kitchen electrics in Malmesbury

What prompts kitchen electrics in Malmesbury?

Buyers of older houses across Wiltshire sometimes find a consumer unit with no RCD protection or spare space, and want it dealt with before a new kitchen goes in.

When a Malmesbury kitchen is stripped back to bare walls, running new cables then costs far less than chasing them in after plastering and tiling. Kitchens in every part of Malmesbury are covered, and the survey visit is free wherever you are in Wiltshire.

What is included in the work?

Here is what usually goes into kitchen electrics, adjusted to your Malmesbury kitchen after we have measured it:

Supplies for the cooker hood, under-cabinet lights and a boiling water tap
Testing, the correct certificate, and notification of the work where it is required
A dedicated circuit for an oven, range cooker or induction hob where needed
A check of the consumer unit, existing circuits and earthing before the layout is fixed
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
Second fix of sockets, switches and appliance connections once tiling is done

What do kitchen electrics cost in Malmesbury?

As a starting point for Malmesbury, these ranges include VAT at 20% and allow for typical labour costs in the South West. Prices across the South West are broadly in line with UK averages.

What do kitchen electrics cost in Malmesbury?
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£260–£520
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£520–£1,500
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£310–£720

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Kitchens in homes around Malmesbury

The housing mix across Wiltshire includes thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates, so no two kitchen fits are quite alike. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance. Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help.

Building regulations, electrics and gas in Malmesbury

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Tips before you start

If you live in a flat in Malmesbury, find out where your consumer unit and meter are, as some sit in communal cupboards that need the managing agent's access.
Ask for USB sockets or extra doubles near the breakfast bar at first fix; changing a faceplate later is easy, adding a new box is not.
Expect the power to be off in parts of your Malmesbury home for a few hours on first-fix and second-fix days, and charge laptops and phones beforehand.
Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.

Questions about kitchen electrics in Malmesbury

How much do kitchen electrics cost in Malmesbury?

Guide prices in Malmesbury are about £260 to £520 including VAT for extra sockets or spurs on existing circuits. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Malmesbury as well?

Yes. As well as Malmesbury itself, we cover the rest of Wiltshire and nearby towns such as Chippenham and Cirencester. The process is the same wherever the kitchen is.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

What paperwork should I get for kitchen electrics?

You should get an Electrical Installation Certificate for any new circuit and a Minor Electrical Installation Works Certificate for additions to an existing circuit, such as extra sockets. In England and Wales, notifiable work is also registered with the council through a competent person scheme or building control, and a compliance certificate follows. Keep these papers safe, because buyers' solicitors and letting agents often ask for them.

Also covering nearby towns

The same service is available a short drive from Malmesbury, including: