Kitchen electrics in Egham

Thinking about kitchen electrics in Egham?

If you are moving the hob to an island or swapping gas for induction in your Egham home, the kitchen needs a new supply routed to the new cooking position.

Buyers of older houses across Surrey sometimes find a consumer unit with no RCD protection or spare space, and want it dealt with before a new kitchen goes in. Our Surrey coverage reaches every part of Egham (TW20) and out towards Staines.

What we cover for kitchen electrics in Egham

Here is what usually goes into kitchen electrics, adjusted to your Egham kitchen after we have measured it:

A check of the consumer unit, existing circuits and earthing before the layout is fixed
Accessible isolation switches for integrated appliances, reachable without pulling units out
First-fix cables and back boxes run before plastering or boarding
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
Testing, the correct certificate, and notification of the work where it is required
A dedicated circuit for an oven, range cooker or induction hob where needed

What do kitchen electrics cost in Egham?

Typical kitchen electrics prices for homes in Egham, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What do kitchen electrics cost in Egham?
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£290–£580
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£580–£1,700
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£340–£800

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

What kind of kitchens do we fit in Egham?

The housing mix across Surrey includes 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates, so no two kitchen fits are quite alike. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

What rules apply to kitchen electrics in Egham?

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Practical advice for Egham homeowners

Find your consumer unit and take a photo of it before the survey of your Egham home, so the electrician can see straight away whether it has spare ways.
Walk round your Egham kitchen with the plan and mark where each small appliance will sit; the socket schedule is built from that list.
Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.

Questions about kitchen electrics in Egham

How much do kitchen electrics cost in Egham?

For extra sockets or spurs on existing circuits, budget around £290 to £580 including VAT in Egham. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Which parts of Egham do you work in?

All of them. Our Surrey coverage takes in the whole of Egham, including the TW20 postcode district, as well as surrounding towns such as Staines. If you are unsure, send us your postcode.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Kitchen electrics near Egham

Neighbouring towns where we offer kitchen electrics: