Kitchen design and planning in West Ham

Thinking about kitchen design and planning in West Ham?

Homeowners in West Ham often ask for a design when the kitchen layout no longer suits how they live, even though the room itself is a reasonable size.

If your West Ham kitchen is a narrow galley in an older terrace, a measured plan shows whether one run, two runs or moving the door works better. Our Greater London coverage reaches every part of West Ham (E13) and out towards Stratford.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Working zones planned for preparation, cooking, washing and storage
Socket, switch, lighting and extraction positions marked for the electrician
Positions of water, waste, gas, power and radiators recorded on the plan
A final plan and specification to order from and fit to
Measured survey of walls, windows, doors, ceiling height and floor levels
Elevations and 3D views for larger or open-plan kitchens where chosen

Kitchen design and planning prices in West Ham

The figures below are guide prices for West Ham, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Kitchen design and planning prices in West Ham
Typical project	Guide price
Design for a kitchen we supplyMeasured survey, layout plan and specification are part of the supply-and-fit price	Included
Measured drawings and layout plan for a kitchen bought elsewhereMeasured drawing, layout and service positions for your fitter and supplier	£390–£1,200
Detailed design with 3D views and elevationsFor larger or open-plan kitchens	£780–£2,000

Design is included in the supply-and-fit price; for kitchens bought elsewhere, the guide prices cover the measured survey, layout drawing and service positions, with 3D views and elevations in the detailed option. The survey visit to quote is free; the fee covers the measured drawings and layout plan you can take to any supplier. Prices include VAT at 20%.

Kitchens in homes around West Ham

In and around West Ham, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Do you need approval for kitchen design and planning in West Ham?

Designing and fitting a kitchen needs no planning permission in England, but a good plan allows for the rules that follow. New circuits are notifiable under Part P, a cooker hood extracting outside should achieve about 30 litres per second under Approved Document F, and removing a load-bearing wall needs a structural engineer and building control approval. Listed buildings and flats may need consent before a new outside vent is cut.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

Note where sunlight falls in your West Ham kitchen during the day, as it affects where people like to prepare food and sit.
Count the small appliances you use every day, such as a kettle, toaster and coffee machine, so enough worktop sockets are planned for them.
Open every cupboard in your current kitchen and decide what you use, what you store and what you could do without before planning storage.
Base units are typically 600 mm deep with a worktop height of around 900 mm; taller or shorter cooks may want this adjusted.

Questions about kitchen design and planning in West Ham

How much does kitchen design and planning cost in West Ham?

Kitchen design and planning in West Ham typically costs £390 to £1,200 including VAT for measured drawings and a layout plan for a kitchen bought elsewhere, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near West Ham as well?

Yes. As well as West Ham itself, we cover the rest of Greater London and nearby towns such as Stratford and Canning Town. The process is the same wherever the kitchen is.

What are the standard sizes of kitchen units and worktops?

Base units are typically 600 mm deep, with worktops around 900 mm from the floor, though the plinth height can raise or lower this slightly. Unit widths come in standard steps, commonly from 150 mm up to 1,000 mm, and wall units are shallower, often around 300 to 350 mm deep. A plan built on real measurements uses filler panels to take up any leftover space.

What is the kitchen work triangle?

The work triangle is a planning idea that links the sink, hob and fridge, keeping each within a short, unobstructed walk of the others so cooking takes fewer steps. It is still a useful check, but many kitchens are now planned in zones for preparation, cooking, washing and storage, which suits larger and open-plan rooms where more than one person uses the space.

Which kitchen layout suits my room?

It depends mainly on the shape of the room, where the doors and windows sit and how many people cook. Narrow rooms suit a galley, rooms with a corner suit an L-shape, and wider rooms can take a U-shape. An island needs space for walkways of around a metre on each side, and a peninsula gives similar worktop space where an island will not fit.

Also covering nearby towns

We also carry out kitchen design and planning in these towns near West Ham: