Kitchen Installers UK

Kitchen design and planning · Scotland

Kitchen design and planning in Perth and Kinross

Our kitchen design and planning work covers the whole of Perth and Kinross, including Perth, Crieff and Fife.

Guide price£280 to £1,400
Towns covered2 towns, including Perth
Timescale1 to 3 weeks from survey to final plan
A designer measuring a stripped kitchen wall with a laser measure, a layout plan on a clipboard on the floor

Why kitchen design and planning for a Perth and Kinross home?

Families across Perth and Kinross sometimes want a layout that lets two people cook at the same time, which changes how the working zones and walkways are planned.

In a Perth and Kinross semi with a small back kitchen, planning often comes down to fitting more storage and worktop into the same footprint without crowding the room.

What does kitchen design and planning in Perth and Kinross include?

The exact scope is agreed after the survey, but a typical job in Perth and Kinross covers:

  • Measured survey of walls, windows, doors, ceiling height and floor levels
  • Positions of water, waste, gas, power and radiators recorded on the plan
  • Layout options such as galley, L-shaped, U-shaped, island or peninsula
  • Working zones planned for preparation, cooking, washing and storage
  • Appliance positions, housings and ventilation gaps checked against real sizes
  • Socket, switch, lighting and extraction positions marked for the electrician
  • Elevations and 3D views for larger or open-plan kitchens where chosen
  • A final plan and specification to order from and fit to

How much does kitchen design and planning cost in Perth and Kinross?

As a starting point for Perth and Kinross, these ranges include VAT at 20% and allow for typical labour costs in Scotland. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.

How much does kitchen design and planning cost in Perth and Kinross?
Typical projectGuide price
Design for a kitchen we supplyMeasured survey, layout plan and specification are part of the supply-and-fit priceIncluded
Measured drawings and layout plan for a kitchen bought elsewhereMeasured drawing, layout and service positions for your fitter and supplier£280–£850
Detailed design with 3D views and elevationsFor larger or open-plan kitchens£560–£1,400

Design is included in the supply-and-fit price; for kitchens bought elsewhere, the guide prices cover the measured survey, layout drawing and service positions, with 3D views and elevations in the detailed option. The survey visit to quote is free; the fee covers the measured drawings and layout plan you can take to any supplier. Prices include VAT at 20%.

Kitchens in homes across Perth and Kinross

You will find sandstone tenement flats, Victorian villas, stone cottages and post-war council-built houses throughout Perth and Kinross. Victorian villas in Perth and Crieff often have a separate kitchen and former scullery, while tenement flats tend to have a small kitchen off the hall.

Mains water across Perth and Kinross is soft, though some remote homes rely on private supplies that may need testing and filtering. Highland Perthshire roads can be narrow and winding, and older town streets may have limited parking, so delivery vehicle size and timing are planned ahead.

Joining a villa kitchen and old scullery into one room is a common project, with a building warrant needed if a load-bearing wall is involved. Rural cottages are often off the gas grid and suit induction cooking or an oil-fired range.

Rules for kitchen design and planning in Perth and Kinross

In Scotland, designing and fitting a kitchen does not normally need a building warrant, but removing a load-bearing wall or altering drainage needs one before work starts. Electrical positions must meet the building standards and BS 7671, and extract ventilation should meet standard 3.14 of the domestic Technical Handbook. Listed buildings may need listed building consent, so check with your local authority if your home is listed.

Parts of highland Perthshire lie within the Cairngorms or Loch Lomond and The Trossachs national parks, and listed buildings elsewhere may need consent for new vents.

Before you start

  • Base units are typically 600 mm deep with a worktop height of around 900 mm; taller or shorter cooks may want this adjusted.
  • Mark radiators, the boiler, stopcock and meters on the plan early, as moving them adds cost and changes what can go where.
  • Leave clear walkways; common guidance is around a metre between facing runs or around an island, and more if two people cook together.
  • Plan landing space either side of the hob and next to the oven and fridge, so hot pans and shopping always have somewhere to go.
  • Before the survey, list what frustrates you about your current Perth and Kinross kitchen; it is the quickest way to shape a better layout.
  • Note where sunlight falls in your Perth and Kinross kitchen during the day, as it affects where people like to prepare food and sit.

Questions about kitchen design and planning in Perth and Kinross

How much does kitchen design and planning cost in Perth and Kinross?

Guide prices in Perth and Kinross are about £280 to £850 including VAT for measured drawings and a layout plan for a kitchen bought elsewhere. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover the whole of Perth and Kinross?

Yes. We carry out kitchen design and planning across Perth and Kinross, including Perth and Crieff. Every job starts with a free survey visit and an itemised written quote.

How long does kitchen design take?

Usually one to three weeks from the survey to a final plan, depending on how many layout options you want to compare and how quickly choices about doors, worktops and appliances are made. A replacement in the same layout can be settled quickly, while an open-plan room with an island or moved services often takes a few rounds of changes.

What are the standard sizes of kitchen units and worktops?

Base units are typically 600 mm deep, with worktops around 900 mm from the floor, though the plinth height can raise or lower this slightly. Unit widths come in standard steps, commonly from 150 mm up to 1,000 mm, and wall units are shallower, often around 300 to 350 mm deep. A plan built on real measurements uses filler panels to take up any leftover space.

What is the kitchen work triangle?

The work triangle is a planning idea that links the sink, hob and fridge, keeping each within a short, unobstructed walk of the others so cooking takes fewer steps. It is still a useful check, but many kitchens are now planned in zones for preparation, cooking, washing and storage, which suits larger and open-plan rooms where more than one person uses the space.

Kitchen design and planning in towns across Perth and Kinross

Choose a town for local guide prices and postcode coverage:

Kitchen design and planning in nearby areas

Free survey visit

Book a free survey visit in Perth and Kinross

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price