Kitchen design and planning in Nelson

Thinking about kitchen design and planning in Nelson?

Homeowners in Nelson often ask for a design when the kitchen layout no longer suits how they live, even though the room itself is a reasonable size.

People in Lancashire planning an open-plan kitchen-diner often want a layout drawn before their builder starts, so services end up in exactly the right places. Our Lancashire coverage reaches every part of Nelson (BB9) and out towards Colne.

What we cover for kitchen design and planning in Nelson

Here is what usually goes into kitchen design and planning, adjusted to your Nelson kitchen after we have measured it:

Appliance positions, housings and ventilation gaps checked against real sizes
Socket, switch, lighting and extraction positions marked for the electrician
Working zones planned for preparation, cooking, washing and storage
Measured survey of walls, windows, doors, ceiling height and floor levels
A final plan and specification to order from and fit to
Positions of water, waste, gas, power and radiators recorded on the plan

What should you budget for kitchen design and planning in Nelson?

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for kitchen design and planning in Nelson?
Typical project	Guide price
Design for a kitchen we supplyMeasured survey, layout plan and specification are part of the supply-and-fit price	Included
Measured drawings and layout plan for a kitchen bought elsewhereMeasured drawing, layout and service positions for your fitter and supplier	£280–£860
Detailed design with 3D views and elevationsFor larger or open-plan kitchens	£570–£1,400

Design is included in the supply-and-fit price; for kitchens bought elsewhere, the guide prices cover the measured survey, layout drawing and service positions, with 3D views and elevations in the detailed option. The survey visit to quote is free; the fee covers the measured drawings and layout plan you can take to any supplier. Prices include VAT at 20%.

Fitting kitchens in older and newer Nelson homes

Typical homes in this part of Lancashire include stone-built mill-town terraces, red-brick Victorian terraces, 1930s semis and seaside bungalows. Mill-town terraces often have a small back kitchen opening onto a yard, while seaside bungalows and 1930s semis tend to have a square kitchen at the rear.

Back alleys and yards can help with deliveries, though narrow yard gates and steep hill streets may limit how long worktops come in. Most of Lancashire has soft mains water, so heavy limescale is rare and taps, sinks and appliances stay cleaner for longer.

Building regulations, electrics and gas in Nelson

Designing and fitting a kitchen needs no planning permission in England, but a good plan allows for the rules that follow. New circuits are notifiable under Part P, a cooker hood extracting outside should achieve about 30 litres per second under Approved Document F, and removing a load-bearing wall needs a structural engineer and building control approval. Listed buildings and flats may need consent before a new outside vent is cut.

Where an older town-centre home is listed or in a conservation area, a new vent on a front wall may need consent, and flats in converted houses usually need freeholder approval.

Planning ahead

Ask for the plan for your Nelson kitchen to show socket, switch and light positions as well as units, so the electrician can follow it.
Open every cupboard in your current kitchen and decide what you use, what you store and what you could do without before planning storage.
Note where sunlight falls in your Nelson kitchen during the day, as it affects where people like to prepare food and sit.
Keep the sink, hob and fridge reasonably close; the classic work triangle is a useful check, not a rule every kitchen must follow.

Questions about kitchen design and planning in Nelson

How much does kitchen design and planning cost in Nelson?

Kitchen design and planning in Nelson typically costs £280 to £860 including VAT for measured drawings and a layout plan for a kitchen bought elsewhere, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Nelson as well?

Yes. As well as Nelson itself, we cover the rest of Lancashire and nearby towns such as Colne and Burnley. The process is the same wherever the kitchen is.

How long does kitchen design take?

Usually one to three weeks from the survey to a final plan, depending on how many layout options you want to compare and how quickly choices about doors, worktops and appliances are made. A replacement in the same layout can be settled quickly, while an open-plan room with an island or moved services often takes a few rounds of changes.

What are the standard sizes of kitchen units and worktops?

Base units are typically 600 mm deep, with worktops around 900 mm from the floor, though the plinth height can raise or lower this slightly. Unit widths come in standard steps, commonly from 150 mm up to 1,000 mm, and wall units are shallower, often around 300 to 350 mm deep. A plan built on real measurements uses filler panels to take up any leftover space.

What is the kitchen work triangle?

The work triangle is a planning idea that links the sink, hob and fridge, keeping each within a short, unobstructed walk of the others so cooking takes fewer steps. It is still a useful check, but many kitchens are now planned in zones for preparation, cooking, washing and storage, which suits larger and open-plan rooms where more than one person uses the space.

Nearby places we cover

Neighbouring towns where we offer kitchen design and planning: