Kitchen design and planning · Northern Ireland
Kitchen design and planning in County Armagh
If you need kitchen design and planning anywhere in County Armagh, we survey the kitchen, agree the scope with you and book every trade through to handover.
Who usually needs kitchen design and planning in County Armagh?
In a County Armagh semi with a small back kitchen, planning often comes down to fitting more storage and worktop into the same footprint without crowding the room.
People in County Armagh planning an open-plan kitchen-diner often want a layout drawn before their builder starts, so services end up in exactly the right places.
What does kitchen design and planning in County Armagh include?
Here is what usually goes into kitchen design and planning, adjusted to your County Armagh kitchen after we have measured it:
- Measured survey of walls, windows, doors, ceiling height and floor levels
- Positions of water, waste, gas, power and radiators recorded on the plan
- Layout options such as galley, L-shaped, U-shaped, island or peninsula
- Working zones planned for preparation, cooking, washing and storage
- Appliance positions, housings and ventilation gaps checked against real sizes
- Socket, switch, lighting and extraction positions marked for the electrician
- Elevations and 3D views for larger or open-plan kitchens where chosen
- A final plan and specification to order from and fit to
How much does kitchen design and planning cost in County Armagh?
As a starting point for County Armagh, these ranges include VAT at 20% and allow for typical labour costs in Northern Ireland. Prices in Northern Ireland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Design for a kitchen we supplyMeasured survey, layout plan and specification are part of the supply-and-fit price | Included |
| Measured drawings and layout plan for a kitchen bought elsewhereMeasured drawing, layout and service positions for your fitter and supplier | £260–£790 |
| Detailed design with 3D views and elevationsFor larger or open-plan kitchens | £530–£1,300 |
Design is included in the supply-and-fit price; for kitchens bought elsewhere, the guide prices cover the measured survey, layout drawing and service positions, with 3D views and elevations in the detailed option. The survey visit to quote is free; the fee covers the measured drawings and layout plan you can take to any supplier. Prices include VAT at 20%.
Kitchens in homes across County Armagh
The housing mix across County Armagh includes Georgian townhouses, red-brick terraces, new town houses and rural bungalows, so no two kitchen fits are quite alike. Georgian houses in Armagh often have kitchens in former back rooms, while new-town houses in Craigavon and rural bungalows tend to have compact rectangular kitchens.
Hardness in County Armagh depends on the source, from soft to moderately hard, so check with your water supplier before choosing a filter. Country lanes and farm entrances can be tight for delivery lorries, and older terraced streets may have limited parking, so delivery is planned ahead.
Rural bungalow refits are common, often adding a utility room for boots and laundry, more storage and an open kitchen-dining area. Terraces and Georgian town houses tend to have smaller kitchens, where careful planning around period features, chimney breasts and uneven walls matters.
Rules for kitchen design and planning in County Armagh
In Northern Ireland, a new kitchen layout needs no planning permission, but structural changes and new drainage connections go to council building control. Domestic electrics have no notification scheme, though socket and circuit positions should be designed, installed and tested to BS 7671. Technical Booklet K covers ventilation, and moving a gas hob means new pipework by a Gas Safe registered engineer.
Armagh's Georgian centre is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.
Before you start
- Keep the sink, hob and fridge reasonably close; the classic work triangle is a useful check, not a rule every kitchen must follow.
- Mark radiators, the boiler, stopcock and meters on the plan early, as moving them adds cost and changes what can go where.
- Work out the route for cooker hood ducting to an outside wall before fixing the hob position, as long or bent runs reduce extraction.
- Leave clear walkways; common guidance is around a metre between facing runs or around an island, and more if two people cook together.
- Count the small appliances you use every day, such as a kettle, toaster and coffee machine, so enough worktop sockets are planned for them.
- If your home in County Armagh has a boiler in the kitchen, ask for service access to be designed in rather than boxed in tightly.
Questions about kitchen design and planning in County Armagh
How much does kitchen design and planning cost in County Armagh?
For measured drawings and a layout plan for a kitchen bought elsewhere, budget around £260 to £790 including VAT in County Armagh. That reflects typical costs in Northern Ireland; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of County Armagh?
Yes. We carry out kitchen design and planning across County Armagh, including Craigavon, Portadown and Armagh. Every job starts with a free survey visit and an itemised written quote.
What is the kitchen work triangle?
The work triangle is a planning idea that links the sink, hob and fridge, keeping each within a short, unobstructed walk of the others so cooking takes fewer steps. It is still a useful check, but many kitchens are now planned in zones for preparation, cooking, washing and storage, which suits larger and open-plan rooms where more than one person uses the space.
How long does kitchen design take?
Usually one to three weeks from the survey to a final plan, depending on how many layout options you want to compare and how quickly choices about doors, worktops and appliances are made. A replacement in the same layout can be settled quickly, while an open-plan room with an island or moved services often takes a few rounds of changes.
What are the standard sizes of kitchen units and worktops?
Base units are typically 600 mm deep, with worktops around 900 mm from the floor, though the plinth height can raise or lower this slightly. Unit widths come in standard steps, commonly from 150 mm up to 1,000 mm, and wall units are shallower, often around 300 to 350 mm deep. A plan built on real measurements uses filler panels to take up any leftover space.
Kitchen design and planning in towns across County Armagh
Choose a town for local guide prices and postcode coverage:
- Kitchen design and planning in Craigavon
- Kitchen design and planning in Portadown
- Kitchen design and planning in Armagh