Kitchen design and planning · England
Kitchen design and planning in Cambridgeshire
If you need kitchen design and planning anywhere in Cambridgeshire, we survey the kitchen, agree the scope with you and book every trade through to handover.
When does kitchen design and planning make sense in Cambridgeshire?
If you are thinking about an island for a Cambridgeshire kitchen, a design check tells you early whether the room is wide enough for comfortable walkways.
If your Cambridgeshire kitchen is a narrow galley in an older terrace, a measured plan shows whether one run, two runs or moving the door works better.
What does kitchen design and planning in Cambridgeshire include?
The exact scope is agreed after the survey, but a typical job in Cambridgeshire covers:
- Measured survey of walls, windows, doors, ceiling height and floor levels
- Positions of water, waste, gas, power and radiators recorded on the plan
- Layout options such as galley, L-shaped, U-shaped, island or peninsula
- Working zones planned for preparation, cooking, washing and storage
- Appliance positions, housings and ventilation gaps checked against real sizes
- Socket, switch, lighting and extraction positions marked for the electrician
- Elevations and 3D views for larger or open-plan kitchens where chosen
- A final plan and specification to order from and fit to
How much does kitchen design and planning cost in Cambridgeshire?
Typical kitchen design and planning prices for homes in Cambridgeshire, including VAT and adjusted for the East of England. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the East of England usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Design for a kitchen we supplyMeasured survey, layout plan and specification are part of the supply-and-fit price | Included |
| Measured drawings and layout plan for a kitchen bought elsewhereMeasured drawing, layout and service positions for your fitter and supplier | £320–£970 |
| Detailed design with 3D views and elevationsFor larger or open-plan kitchens | £650–£1,600 |
Design is included in the supply-and-fit price; for kitchens bought elsewhere, the guide prices cover the measured survey, layout drawing and service positions, with 3D views and elevations in the detailed option. The survey visit to quote is free; the fee covers the measured drawings and layout plan you can take to any supplier. Prices include VAT at 20%.
Kitchens in homes across Cambridgeshire
The housing mix across Cambridgeshire includes Victorian terraces, 1930s semis, post-war estate houses and fenland bungalows and farmhouses, so no two kitchen fits are quite alike. Terraced houses in Cambridge and Peterborough often have a narrow galley at the back, while Fen bungalows tend to have a simple square kitchen beside the living room.
Water across Cambridgeshire is very hard, so limescale on taps and boiling water taps is common and a filter or softener is worth thinking about. Fen roads and farm tracks can be narrow for delivery lorries, and city-centre terraces often have permit parking and no rear access for long worktops.
Victorian terraces here often have a small rear kitchen, and opening it into the dining room is a common way to gain space. For a Fenland bungalow or farmhouse, the job may also involve levelling uneven floors and packing out walls before the units go in.
Rules for kitchen design and planning in Cambridgeshire
Designing and fitting a kitchen needs no planning permission in England, but a good plan allows for the rules that follow. New circuits are notifiable under Part P, a cooker hood extracting outside should achieve about 30 litres per second under Approved Document F, and removing a load-bearing wall needs a structural engineer and building control approval. Listed buildings and flats may need consent before a new outside vent is cut.
Listed houses in historic centres such as Cambridge and Ely may need consent for internal changes or a new vent, although a straightforward kitchen fit needs no planning permission.
Before you start
- Plan landing space either side of the hob and next to the oven and fridge, so hot pans and shopping always have somewhere to go.
- Base units are typically 600 mm deep with a worktop height of around 900 mm; taller or shorter cooks may want this adjusted.
- Mark radiators, the boiler, stopcock and meters on the plan early, as moving them adds cost and changes what can go where.
- Leave clear walkways; common guidance is around a metre between facing runs or around an island, and more if two people cook together.
- If you are extending or knocking through in Cambridgeshire, finalise the kitchen plan before the builder fixes drainage and power points.
- If your home in Cambridgeshire has a boiler in the kitchen, ask for service access to be designed in rather than boxed in tightly.
Questions about kitchen design and planning in Cambridgeshire
How much does kitchen design and planning cost in Cambridgeshire?
Kitchen design and planning in Cambridgeshire typically costs £320 to £970 including VAT for measured drawings and a layout plan for a kitchen bought elsewhere, based on prices in the East of England. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Cambridgeshire?
Yes. We carry out kitchen design and planning across Cambridgeshire, including Peterborough, Cambridge, Wisbech and St Neots. Every job starts with a free survey visit and an itemised written quote.
What is the kitchen work triangle?
The work triangle is a planning idea that links the sink, hob and fridge, keeping each within a short, unobstructed walk of the others so cooking takes fewer steps. It is still a useful check, but many kitchens are now planned in zones for preparation, cooking, washing and storage, which suits larger and open-plan rooms where more than one person uses the space.
Which kitchen layout suits my room?
It depends mainly on the shape of the room, where the doors and windows sit and how many people cook. Narrow rooms suit a galley, rooms with a corner suit an L-shape, and wider rooms can take a U-shape. An island needs space for walkways of around a metre on each side, and a peninsula gives similar worktop space where an island will not fit.
What are the standard sizes of kitchen units and worktops?
Base units are typically 600 mm deep, with worktops around 900 mm from the floor, though the plinth height can raise or lower this slightly. Unit widths come in standard steps, commonly from 150 mm up to 1,000 mm, and wall units are shallower, often around 300 to 350 mm deep. A plan built on real measurements uses filler panels to take up any leftover space.
Kitchen design and planning in towns across Cambridgeshire
Choose a town for local guide prices and postcode coverage:
- Kitchen design and planning in Peterborough
- Kitchen design and planning in Cambridge
- Kitchen design and planning in Wisbech
- Kitchen design and planning in St Neots
- Kitchen design and planning in Huntingdon
- Kitchen design and planning in March
- Kitchen design and planning in Ely