Integrated appliance installation in Tyne and Wear

Who usually needs integrated appliance installation in Tyne and Wear?

Some people in Tyne and Wear upgrade to a double oven at the same time as other appliances, which can mean a new cooker circuit from the consumer unit as well.

Landlords in Tyne and Wear choosing integrated appliances for a rental kitchen want them fixed securely and plumbed with accessible valves, so a later replacement is straightforward.

What does integrated appliance installation in Tyne and Wear include?

Here is what usually goes into integrated appliance installation, adjusted to your Tyne and Wear kitchen after we have measured it:

Appliance sizes checked against housings, door-fixing kits and ventilation gaps before fitting
Integrated fridges and freezers fixed into tall or under-counter housings
Furniture doors attached with the fixed-hinge or sliding-hinge kit and aligned
Dishwashers anchored under the worktop, levelled and connected to the supply and waste
Washing machines plumbed in on a stable floor with an accessible isolation valve
Built-in ovens and microwaves fixed into housings with the required ventilation space
Accessible switching for built-in appliances, such as a switched fused spur, where needed
Leak checks, final door adjustments and each appliance switched on and tested

How much does integrated appliance installation cost in Tyne and Wear?

Use these ranges to plan your budget. They include VAT, reflect costs in the North East, and are firmed up once we have seen your Tyne and Wear kitchen. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.

How much does integrated appliance installation cost in Tyne and Wear?
Typical project	Guide price
Integrated appliance fitted into its housing (each)Fridge, freezer, dishwasher or washing machine, door fitted	£40–£70 each
Dishwasher or washing machine plumbed inValve, waste connection and leak check	£70–£160
Built-in oven fitted, like for likeOn an existing suitable circuit	£110–£220
New cooker circuit from the consumer unitOften needed for a double oven or induction hob	£270–£630

Guide ranges cover labour on existing suitable supplies, apart from the new cooker circuit row; moved plumbing, new housings or units, door-fixing kits and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes across Tyne and Wear

The housing mix across Tyne and Wear includes tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses, so no two kitchen fits are quite alike. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

In an upper Tyneside flat, the kitchen often sits in a narrow offshoot, so planning a usable layout within that width is the main task. Terraces and semis frequently have a separate kitchen that owners open into the dining room.

Rules for integrated appliance installation in Tyne and Wear

Fitting an integrated appliance needs no approval in England. Adding a socket or switched fused spur to an existing kitchen circuit is not notifiable under Part P, though it must meet BS 7671. A new circuit for a double oven or induction hob is notifiable, so it is certified through a competent person scheme or building control. Water connections should meet the water fittings regulations, with isolation valves and suitable backflow protection.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Before you start

Check the installation dimensions in each appliance manual against the housing before buying; a few millimetres out can stop a door closing.
Plan accessible switching for built-in appliances, such as a switched fused spur above the worktop, so they can be isolated without pulling them out.
Integrated fridges use either fixed-hinge (door-on-door) or sliding-hinge fixing, and the housing and furniture door must suit the type you choose.
Leave the ventilation gaps the manufacturer specifies for fridges and freezers, often through the plinth or above the housing, or they work harder.
Make sure the plinths in front of fridges and freezers include the ventilation grille or gap the appliance manufacturer asks for, not a solid panel.
If your Tyne and Wear home has a suspended timber floor, ask for the washing machine position to be checked for firmness before it is plumbed in.

Questions about integrated appliance installation in Tyne and Wear

How much does integrated appliance installation cost in Tyne and Wear?

Guide prices in Tyne and Wear are about £40 to £70 each including VAT for fitting an integrated appliance into its housing. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover the whole of Tyne and Wear?

Yes. We carry out integrated appliance installation across Tyne and Wear, including Newcastle upon Tyne, Sunderland, South Shields and Gateshead. Every job starts with a free survey visit and an itemised written quote.

What is the difference between fixed-hinge and sliding-hinge integrated fridges?

On a fixed-hinge, or door-on-door, fridge the kitchen door is fixed straight onto the appliance door, so both swing together on the fridge's own hinges. On a sliding-hinge fridge the kitchen door hangs on cabinet hinges, and the appliance door is linked to it by runners that slide as it opens. Fixed-hinge models generally carry heavier doors more securely; sliding-hinge ones need the right housing and hinges.

Can you fit integrated appliances I have bought separately?

Yes. Appliances bought from any retailer can be fitted, as long as they match the housings. Send us the model numbers before the survey so we can check the installation dimensions, door-fixing method and connections. If an appliance does not suit the housing, it is far easier to exchange it unopened than to alter the units around it.

Do integrated fridges need ventilation?

Yes. Fridges and freezers give off heat as they run, so the housing must leave the airflow route the manufacturer specifies, often a gap behind the appliance and a vent in the plinth or above the housing. Without it the appliance works harder, uses more energy and may struggle to keep food cold. We check the gaps against the installation instructions before fitting.

Integrated appliance installation in towns across Tyne and Wear

Choose a town for local guide prices and postcode coverage:

Integrated appliance installation in Tyne and Wear

Who usually needs integrated appliance installation in Tyne and Wear?

What does integrated appliance installation in Tyne and Wear include?

How much does integrated appliance installation cost in Tyne and Wear?

Kitchens in homes across Tyne and Wear

Rules for integrated appliance installation in Tyne and Wear

Before you start

Questions about integrated appliance installation in Tyne and Wear

Integrated appliance installation in towns across Tyne and Wear

Integrated appliance installation in nearby areas

Book a free survey visit in Tyne and Wear

Book a free survey visit