Kitchen Installers UK

Integrated appliance installation · Hampshire

Integrated appliance installation in Farnborough

Need integrated appliance installation in Farnborough? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.

Guide priceFrom £50 each
Postcodes includeGU11
TimescaleUsually part of the fit
An installer adjusting the door of an integrated dishwasher so it lines up with the drawer fronts beside it

Why integrated appliance installation for a Farnborough home?

Homeowners across Hampshire moving from freestanding to integrated appliances often need housings adapted, door-fixing kits fitted and new spurs added, all planned as part of the change.

If your kitchen in Farnborough has a dishwasher door that sits proud or a fridge door that drops, the cause is often the fitting or the housing rather than the appliance. We cover all of Farnborough, including the GU11 postcode district, and travel out to neighbouring towns across Hampshire.

What is in a typical job?

After the survey visit we write the scope down. For integrated appliance installation in Farnborough it usually covers:

  • Washing machines plumbed in on a stable floor with an accessible isolation valve
  • Leak checks, final door adjustments and each appliance switched on and tested
  • Integrated fridges and freezers fixed into tall or under-counter housings
  • Dishwashers anchored under the worktop, levelled and connected to the supply and waste
  • Furniture doors attached with the fixed-hinge or sliding-hinge kit and aligned
  • Accessible switching for built-in appliances, such as a switched fused spur, where needed

Integrated appliance installation prices in Farnborough

Typical integrated appliance installation prices for homes in Farnborough, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Integrated appliance installation prices in Farnborough
Typical projectGuide price
Integrated appliance fitted into its housing (each)Fridge, freezer, dishwasher or washing machine, door fitted£50–£90 each
Dishwasher or washing machine plumbed inValve, waste connection and leak check£90–£210
Built-in oven fitted, like for likeOn an existing suitable circuit£140–£290
New cooker circuit from the consumer unitOften needed for a double oven or induction hob£340–£800

Guide ranges cover labour on existing suitable supplies, apart from the new cooker circuit row; moved plumbing, new housings or units, door-fixing kits and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Farnborough?

In and around Farnborough, homes range across Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Building regulations, electrics and gas in Farnborough

Fitting an integrated appliance needs no approval in England. Adding a socket or switched fused spur to an existing kitchen circuit is not notifiable under Part P, though it must meet BS 7671. A new circuit for a double oven or induction hob is notifiable, so it is certified through a competent person scheme or building control. Water connections should meet the water fittings regulations, with isolation valves and suitable backflow protection.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Planning ahead

  • Check that the furniture doors for your dishwasher and fridge are the correct height and drilled for the right fixings before fitting day comes round.
  • If you are replacing a single integrated appliance in your kitchen in Hampshire, note the old model number, as it helps find a replacement with matching dimensions.
  • Ask for isolation valves and switches to stay reachable after fitting in your Farnborough home, so an appliance can be turned off without removing it.
  • Check the installation dimensions in each appliance manual against the housing before buying; a few millimetres out can stop a door closing.

Questions about integrated appliance installation in Farnborough

How much does integrated appliance installation cost in Farnborough?

For fitting an integrated appliance into its housing, budget around £50 to £90 each including VAT in Farnborough. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Farnborough?

Yes. We work across Farnborough, including the GU11 postcode district, and nearby towns such as Camberley and Aldershot. Book a free survey visit and we will arrange a time that suits you.

Do integrated fridges need ventilation?

Yes. Fridges and freezers give off heat as they run, so the housing must leave the airflow route the manufacturer specifies, often a gap behind the appliance and a vent in the plinth or above the housing. Without it the appliance works harder, uses more energy and may struggle to keep food cold. We check the gaps against the installation instructions before fitting.

Do built-in appliances need their own switch?

It is good practice under BS 7671 for built-in appliances to have an accessible means of isolation, for example a switched fused spur above the worktop, so they can be switched off without being pulled out. Some layouts use an accessible socket in a neighbouring cupboard instead. Manufacturers' instructions often cover this too, and the electrician confirms the right arrangement for your kitchen.

Why does an integrated dishwasher need fixing under the worktop?

Because a dishwasher can tip forward when the loaded door and racks are pulled out, and it moves slightly as it runs. It is anchored with the brackets supplied, usually to the underside of the worktop or to the side panels, then levelled so its door lines up with the drawer fronts beside it. Stone worktops usually need the side fixings rather than screws from below.

Integrated appliance installation in neighbouring towns

We also carry out integrated appliance installation in these towns near Farnborough:

Planning more than one job in Farnborough?

Free survey visit

Book a free survey visit in Farnborough

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price