Kitchen Installers UK

Integrated appliance installation · Devon

Integrated appliance installation in Exeter

Integrated appliance installation for Exeter homes: fridges, freezers, dishwashers, ovens and washing machines fitted into housings with doors lined up. Every job starts with a free survey visit and a written quote.

Guide priceFrom £40 each
Postcodes includeEX2
TimescaleUsually part of the fit
An installer adjusting the door of an integrated dishwasher so it lines up with the drawer fronts beside it

Why integrated appliance installation for an Exeter home?

If an integrated fridge or dishwasher has failed in your Exeter kitchen, the replacement has to fit the old housing and door, which is rarely as simple as it looks.

Many people in Exeter buy integrated appliances separately from the kitchen and then need someone to fit them so the doors line up with everything around them. Homes right across Exeter are covered, as are nearby places such as Exmouth, Tiverton and the villages in between.

What we cover for integrated appliance installation in Exeter

The exact scope is agreed after the survey, but a typical job in Exeter covers:

  • Dishwashers anchored under the worktop, levelled and connected to the supply and waste
  • Appliance sizes checked against housings, door-fixing kits and ventilation gaps before fitting
  • Integrated fridges and freezers fixed into tall or under-counter housings
  • Washing machines plumbed in on a stable floor with an accessible isolation valve
  • Accessible switching for built-in appliances, such as a switched fused spur, where needed
  • Built-in ovens and microwaves fixed into housings with the required ventilation space

Guide prices for integrated appliance installation in Exeter

The figures below are guide prices for Exeter, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. For the South West, these ranges are close to the national figures.

Guide prices for integrated appliance installation in Exeter
Typical projectGuide price
Integrated appliance fitted into its housing (each)Fridge, freezer, dishwasher or washing machine, door fitted£40–£80 each
Dishwasher or washing machine plumbed inValve, waste connection and leak check£80–£190
Built-in oven fitted, like for likeOn an existing suitable circuit£120–£260
New cooker circuit from the consumer unitOften needed for a double oven or induction hob£310–£720

Guide ranges cover labour on existing suitable supplies, apart from the new cooker circuit row; moved plumbing, new housings or units, door-fixing kits and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Exeter

Across Devon you will often find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows, and each shapes the kitchen differently. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.

Do you need approval for integrated appliance installation in Exeter?

Fitting an integrated appliance needs no approval in England. Adding a socket or switched fused spur to an existing kitchen circuit is not notifiable under Part P, though it must meet BS 7671. A new circuit for a double oven or induction hob is notifiable, so it is certified through a competent person scheme or building control. Water connections should meet the water fittings regulations, with isolation valves and suitable backflow protection.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Practical advice for Exeter homeowners

  • Check that the furniture doors for your dishwasher and fridge are the correct height and drilled for the right fixings before fitting day comes round.
  • If you are replacing a single integrated appliance in your kitchen in Devon, note the old model number, as it helps find a replacement with matching dimensions.
  • Ask for isolation valves and switches to stay reachable after fitting in your Exeter home, so an appliance can be turned off without removing it.
  • Leave the ventilation gaps the manufacturer specifies for fridges and freezers, often through the plinth or above the housing, or they work harder.

Questions about integrated appliance installation in Exeter

How much does integrated appliance installation cost in Exeter?

Integrated appliance installation in Exeter typically costs £40 to £80 each including VAT for fitting an integrated appliance into its housing, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Exeter?

Yes. We work across Exeter, including the EX2 postcode district, and nearby towns such as Exmouth and Tiverton. Book a free survey visit and we will arrange a time that suits you.

What is the difference between fixed-hinge and sliding-hinge integrated fridges?

On a fixed-hinge, or door-on-door, fridge the kitchen door is fixed straight onto the appliance door, so both swing together on the fridge's own hinges. On a sliding-hinge fridge the kitchen door hangs on cabinet hinges, and the appliance door is linked to it by runners that slide as it opens. Fixed-hinge models generally carry heavier doors more securely; sliding-hinge ones need the right housing and hinges.

Do integrated fridges need ventilation?

Yes. Fridges and freezers give off heat as they run, so the housing must leave the airflow route the manufacturer specifies, often a gap behind the appliance and a vent in the plinth or above the housing. Without it the appliance works harder, uses more energy and may struggle to keep food cold. We check the gaps against the installation instructions before fitting.

Do built-in appliances need their own switch?

It is good practice under BS 7671 for built-in appliances to have an accessible means of isolation, for example a switched fused spur above the worktop, so they can be switched off without being pulled out. Some layouts use an accessible socket in a neighbouring cupboard instead. Manufacturers' instructions often cover this too, and the electrician confirms the right arrangement for your kitchen.

Nearby places we cover

The same service is available a short drive from Exeter, including:

Combine integrated appliance installation with other work

Free survey visit

Book a free survey visit in Exeter

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price