Kitchen Installers UK

Integrated appliance installation · Bedfordshire

Integrated appliance installation in Bedford

Looking for integrated appliance installation in Bedford? We survey, quote and carry out integrated appliance installation for homes across Bedford and the rest of Bedfordshire, with one contract from the first measure to the final check.

Guide priceFrom £40 each
Postcodes includeMK40
TimescaleUsually part of the fit
An installer adjusting the door of an integrated dishwasher so it lines up with the drawer fronts beside it

Is integrated appliance installation right for your Bedford kitchen?

In a smaller Bedford kitchen, an under-counter fridge and a slimline dishwasher behind kitchen doors can make room on the worktop and floor without changing the layout.

Homeowners across Bedfordshire moving from freestanding to integrated appliances often need housings adapted, door-fixing kits fitted and new spurs added, all planned as part of the change. Homes right across Bedford are covered, as are nearby places such as Kempston, Sandy and the villages in between.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Integrated fridges and freezers fixed into tall or under-counter housings
  • Built-in ovens and microwaves fixed into housings with the required ventilation space
  • Accessible switching for built-in appliances, such as a switched fused spur, where needed
  • Leak checks, final door adjustments and each appliance switched on and tested
  • Appliance sizes checked against housings, door-fixing kits and ventilation gaps before fitting
  • Furniture doors attached with the fixed-hinge or sliding-hinge kit and aligned

Integrated appliance installation prices in Bedford

As a starting point for Bedford, these ranges include VAT at 20% and allow for typical labour costs in the East of England. Labour in the East of England generally costs more than the UK average, which lifts these ranges a little.

Integrated appliance installation prices in Bedford
Typical projectGuide price
Integrated appliance fitted into its housing (each)Fridge, freezer, dishwasher or washing machine, door fitted£40–£90 each
Dishwasher or washing machine plumbed inValve, waste connection and leak check£90–£190
Built-in oven fitted, like for likeOn an existing suitable circuit£130–£270
New cooker circuit from the consumer unitOften needed for a double oven or induction hob£320–£760

Guide ranges cover labour on existing suitable supplies, apart from the new cooker circuit row; moved plumbing, new housings or units, door-fixing kits and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Bedford?

You will find Victorian terraces, 1930s semis, post-war council-built houses and new-build estates throughout Bedfordshire. Terraced houses here often have a narrow galley or back-addition kitchen, while interwar semis tend to have a small square kitchen at the rear.

Town-centre terraces can have tight on-street parking, so it helps to plan where a van unloads and how long worktops will pass through a narrow hallway. Water across most of Bedfordshire is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Do you need approval for integrated appliance installation in Bedford?

Fitting an integrated appliance needs no approval in England. Adding a socket or switched fused spur to an existing kitchen circuit is not notifiable under Part P, though it must meet BS 7671. A new circuit for a double oven or induction hob is notifiable, so it is certified through a competent person scheme or building control. Water connections should meet the water fittings regulations, with isolation valves and suitable backflow protection.

Fitting a kitchen needs no planning permission, but listed cottages in the older market towns may need listed building consent for changes such as a new vent through a historic wall.

Planning ahead

  • Before ordering appliances for your Bedford kitchen, download each installation manual and compare the stated housing dimensions with your kitchen plan.
  • If you are replacing a single integrated appliance in your kitchen in Bedfordshire, note the old model number, as it helps find a replacement with matching dimensions.
  • Make sure the plinths in front of fridges and freezers include the ventilation grille or gap the appliance manufacturer asks for, not a solid panel.
  • Plan accessible switching for built-in appliances, such as a switched fused spur above the worktop, so they can be isolated without pulling them out.

Questions about integrated appliance installation in Bedford

How much does integrated appliance installation cost in Bedford?

Guide prices in Bedford are about £40 to £90 each including VAT for fitting an integrated appliance into its housing. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Bedford do you work in?

All of them. Our Bedfordshire coverage takes in the whole of Bedford, including the MK40 postcode district, as well as surrounding towns such as Kempston. If you are unsure, send us your postcode.

Can you fit integrated appliances I have bought separately?

Yes. Appliances bought from any retailer can be fitted, as long as they match the housings. Send us the model numbers before the survey so we can check the installation dimensions, door-fixing method and connections. If an appliance does not suit the housing, it is far easier to exchange it unopened than to alter the units around it.

What is the difference between fixed-hinge and sliding-hinge integrated fridges?

On a fixed-hinge, or door-on-door, fridge the kitchen door is fixed straight onto the appliance door, so both swing together on the fridge's own hinges. On a sliding-hinge fridge the kitchen door hangs on cabinet hinges, and the appliance door is linked to it by runners that slide as it opens. Fixed-hinge models generally carry heavier doors more securely; sliding-hinge ones need the right housing and hinges.

Do built-in appliances need their own switch?

It is good practice under BS 7671 for built-in appliances to have an accessible means of isolation, for example a switched fused spur above the worktop, so they can be switched off without being pulled out. Some layouts use an accessible socket in a neighbouring cupboard instead. Manufacturers' instructions often cover this too, and the electrician confirms the right arrangement for your kitchen.

Integrated appliance installation near Bedford

Close to Bedford? We cover these nearby towns too:

Planning more than one job in Bedford?

Free survey visit

Book a free survey visit in Bedford

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price