Hob and oven installation in Streatham

When does hob and oven installation make sense in Streatham?

If your Streatham kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.

A new kitchen layout in Streatham sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. If your home is in Streatham or close by in Norbury or Tooting, the same survey, quote and fitting process applies.

What is in a typical job?

After the survey visit we write the scope down. For hob and oven installation in Streatham it usually covers:

Gas supply moved to a new hob position, with pipework tested and made good
Built-in single and double ovens fixed into housings with their ventilation gaps
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Old hob or oven disconnected safely and taken away for recycling
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator

What does hob and oven installation cost in Streatham?

As a starting point for Streatham, these ranges include VAT at 20% and allow for typical labour costs in London. Prices in London usually run above the national guide, mainly because labour and parking cost more.

What does hob and oven installation cost in Streatham?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Do you need approval for hob and oven installation in Streatham?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Before buying an induction hob for your Streatham home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If you are moving the hob in your Streatham kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Streatham

How much does hob and oven installation cost in Streatham?

For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in Streatham. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Which parts of Streatham do you work in?

All of them. Our Greater London coverage takes in the whole of Streatham, including the SW16 postcode district, as well as surrounding towns such as Norbury. If you are unsure, send us your postcode.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Also covering nearby towns

We also carry out hob and oven installation in these towns near Streatham: