Hob and oven installation · Wales
Hob and oven installation in South Glamorgan
Homeowners and landlords across South Glamorgan can book us for hob and oven installation: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely.
Why hob and oven installation for a South Glamorgan home?
Some people in South Glamorgan buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.
If the oven in your South Glamorgan kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing.
What does hob and oven installation in South Glamorgan include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in South Glamorgan?
These guide ranges include VAT at 20% and are adjusted for prices in Wales. We confirm your price in writing after a free survey visit. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £110–£280 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £110–£230 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £140–£370 |
| New gas pipe run to a new hob positionPipework, testing and making good | £230–£740 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes across South Glamorgan
The housing mix across South Glamorgan includes Victorian terraces, Edwardian villas, post-war estate houses and waterfront apartments, so no two kitchen fits are quite alike. Cardiff's Victorian terraces often have a long galley in the back addition, while Edwardian villas in Penarth may have a separate kitchen and breakfast room.
Much of South Glamorgan has soft to moderately soft water, though some parts are harder, so check with your supplier before choosing a filter. Busy on-street parking in terraced areas and apartment blocks with booked lifts can affect delivery times and how long worktops are carried in.
Knocking a back-addition kitchen through to the middle room or side return is a common project in a Cardiff terrace. Waterfront apartments usually mean a compact, open-plan kitchen fitted to building rules on working hours, lift use and waste removal, with extraction planned around the block's ventilation.
Rules for hob and oven installation in South Glamorgan
In Wales, gas hobs, cookers and pipework are for Gas Safe registered engineers only. Part P is wider than in England: a new cooker circuit is notifiable, and so is extending an existing circuit within a kitchen, for example to add a cooker outlet. That means most hob and oven electrics are certified through a competent person scheme or building control, and all of it must meet BS 7671.
Listed buildings and conservation areas, including parts of Cardiff and Penarth, may need consent for new vents, and apartment owners usually need the freeholder's consent.
Before you start
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
- Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
- A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
- If your South Glamorgan home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
Questions about hob and oven installation in South Glamorgan
How much does hob and oven installation cost in South Glamorgan?
Hob and oven installation in South Glamorgan typically costs £110 to £280 including VAT for connecting a gas hob to an existing supply, based on prices in Wales. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of South Glamorgan?
Yes. We carry out hob and oven installation across South Glamorgan, including Cardiff, Barry, Penarth and Whitchurch, South Glamorgan. Every job starts with a free survey visit and an itemised written quote.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Hob and oven installation in towns across South Glamorgan
Choose a town for local guide prices and postcode coverage:
- Hob and oven installation in Cardiff
- Hob and oven installation in Barry
- Hob and oven installation in Penarth
- Hob and oven installation in Whitchurch, South Glamorgan