Kitchen Installers UK

Hob and oven installation · Greater London

Hob and oven installation in South Croydon

Homeowners and landlords in South Croydon can book us for hob and oven installation: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely.

Guide price£160 to £1,000
Postcodes includeCR0 and CR7
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Who usually needs hob and oven installation in South Croydon?

If the oven in your South Croydon kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing.

Keen cooks across Greater London often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models. We work throughout South Croydon (CR0 and CR7) and across the wider Greater London area.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in South Croydon covers:

  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models

How much does hob and oven installation cost in South Croydon?

As a starting point for South Croydon, these ranges include VAT at 20% and allow for typical labour costs in London. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

How much does hob and oven installation cost in South Croydon?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£200–£520
New gas pipe run to a new hob positionPipework, testing and making good£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in South Croydon

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Planning ahead

  • Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Greater London.
  • If your South Croydon home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater London can be cut correctly by the fabricator.
  • Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.

Questions about hob and oven installation in South Croydon

How much does hob and oven installation cost in South Croydon?

For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in South Croydon. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Can you measure up in South Croydon before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in South Croydon. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Hob and oven installation in neighbouring towns

The same service is available a short drive from South Croydon, including:

More services for South Croydon kitchens

Free survey visit

Book a free survey visit in South Croydon

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price