Kitchen Installers UK

Hob and oven installation · Cambridgeshire

Hob and oven installation in Peterborough

Hob and oven installation for Peterborough homes: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely. Every job starts with a free survey visit and a written quote.

Guide price£130 to £860
Postcodes includePE1
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Is hob and oven installation right for your Peterborough kitchen?

Many households in Peterborough switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

Families in Peterborough adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day. Kitchens in every part of Peterborough are covered, and the survey visit is free wherever you are in Cambridgeshire.

What is in a typical job?

After the survey visit we write the scope down. For hob and oven installation in Peterborough it usually covers:

  • Gas supply moved to a new hob position, with pipework tested and made good
  • Old hob or oven disconnected safely and taken away for recycling
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested

Hob and oven installation prices in Peterborough

These guide ranges include VAT at 20% and are adjusted for prices in the East of England. We confirm your price in writing after a free survey visit. Labour in the East of England generally costs more than the UK average, which lifts these ranges a little.

Hob and oven installation prices in Peterborough
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£130–£320
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£130–£270
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£160–£430
New gas pipe run to a new hob positionPipework, testing and making good£270–£860

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Cambridgeshire include Victorian terraces, 1930s semis, post-war estate houses and fenland bungalows and farmhouses. Terraced houses in Cambridge and Peterborough often have a narrow galley at the back, while Fen bungalows tend to have a simple square kitchen beside the living room.

Fen roads and farm tracks can be narrow for delivery lorries, and city-centre terraces often have permit parking and no rear access for long worktops. Water across Cambridgeshire is very hard, so limescale on taps and boiling water taps is common and a filter or softener is worth thinking about.

Do you need approval for hob and oven installation in Peterborough?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed houses in historic centres such as Cambridge and Ely may need consent for internal changes or a new vent, although a straightforward kitchen fit needs no planning permission.

Worth knowing before the fit

  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • If your Peterborough home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • If you are moving the hob in your Peterborough kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
  • Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.

Questions about hob and oven installation in Peterborough

How much does hob and oven installation cost in Peterborough?

Hob and oven installation in Peterborough typically costs £130 to £320 including VAT for connecting a gas hob to an existing supply, based on prices in the East of England. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Peterborough before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Peterborough. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Also covering nearby towns

Close to Peterborough? We cover these nearby towns too:

Planning more than one job in Peterborough?

Free survey visit

Book a free survey visit in Peterborough

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price