Hob and oven installation in Oadby

Thinking about hob and oven installation in Oadby?

Landlords in Leicestershire replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.

Keen cooks across Leicestershire often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models. Our Leicestershire coverage reaches every part of Oadby (LE2) and out towards Wigston.

What does the job involve?

Here is what usually goes into hob and oven installation, adjusted to your Oadby kitchen after we have measured it:

Built-in single and double ovens fixed into housings with their ventilation gaps
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Old hob or oven disconnected safely and taken away for recycling
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator

What does hob and oven installation cost in Oadby?

Typical hob and oven installation prices for homes in Oadby, including VAT and adjusted for the East Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. For the East Midlands, these ranges are close to the national figures.

What does hob and oven installation cost in Oadby?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£290
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£240
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£390
New gas pipe run to a new hob positionPipework, testing and making good	£240–£780

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Oadby?

You will find Victorian terraces, 1930s semis, post-war estate houses and new-build estates throughout Leicestershire. Leicester's Victorian terraces often have a long galley behind the back room, while 1930s semis tend to have a small square kitchen with a door to the garden.

Leicestershire's water is mostly moderately hard to hard, so limescale on taps and boiling water taps is likely and a filter or softener can help. Densely parked terraced streets and homes without rear access can make unloading slow, so delivery times and the route for long worktops are worth agreeing early.

Regulations for kitchen work in Oadby

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed buildings and conservation areas, including some village centres and older parts of Leicester, may need consent for a new external vent or changes to historic features.

Worth knowing before the fit

Before buying an induction hob for your Oadby home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
If your Oadby home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Oadby

How much does hob and oven installation cost in Oadby?

For connecting a gas hob to an existing supply, budget around £120 to £290 including VAT in Oadby. That reflects typical costs in the East Midlands; we confirm the actual figure in writing once we have measured up.

Do you work near Oadby as well?

Yes. As well as Oadby itself, we cover the rest of Leicestershire and nearby towns such as Wigston and Humberstone. The process is the same wherever the kitchen is.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Hob and oven installation in neighbouring towns

We also carry out hob and oven installation in these towns near Oadby: