Kitchen Installers UK

Hob and oven installation · Gwent

Hob and oven installation in Newport, Gwent

We take on hob and oven installation in Newport, Gwent and the surrounding NP10, NP11, NP18, NP19 and NP20 postcodes, working to a written scope so you know exactly what is included before anyone starts.

Guide price£110 to £740
Postcodes includeNP10, NP11, NP18 and NP19
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Why hob and oven installation for a Newport, Gwent home?

Some people in Newport, Gwent buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.

If your Newport, Gwent kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. We cover all of Newport, Gwent, including the NP10, NP11, NP18, NP19 and NP20 postcode districts, and travel out to neighbouring towns across Gwent.

What does hob and oven installation in Newport, Gwent include?

After the survey visit we write the scope down. For hob and oven installation in Newport, Gwent it usually covers:

  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Old hob or oven disconnected safely and taken away for recycling
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator

Hob and oven installation prices in Newport, Gwent

As a starting point for Newport, Gwent, these ranges include VAT at 20% and allow for typical labour costs in Wales. Labour rates in Wales are generally lower than in London and the South East, so these ranges are a little below the national guide.

Hob and oven installation prices in Newport, Gwent
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£110–£280
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£110–£230
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£140–£370
New gas pipe run to a new hob positionPipework, testing and making good£230–£740

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Newport, Gwent homes

Across Gwent you will often find valley terraces, Victorian villas, post-war council-built houses and new-build estates, and each shapes the kitchen differently. Valley terraces often have a small kitchen in the rear extension, while Victorian villas in Newport and post-war houses in Cwmbran tend to have a separate kitchen and dining room.

Steep valley streets, terraces with steps up to the door and limited parking can make carrying long worktops difficult, so access is checked at the survey. Water across most of Gwent is soft to moderately soft, which is kinder to taps, though some areas are harder, so check with your supplier.

Regulations for kitchen work in Newport, Gwent

In Wales, gas hobs, cookers and pipework are for Gas Safe registered engineers only. Part P is wider than in England: a new cooker circuit is notifiable, and so is extending an existing circuit within a kitchen, for example to add a cooker outlet. That means most hob and oven electrics are certified through a competent person scheme or building control, and all of it must meet BS 7671.

The northern edge of Gwent falls within Bannau Brycheiniog National Park, and listed buildings or conservation areas elsewhere may need consent for new external vents.

Planning ahead

  • If your Newport, Gwent home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Gwent.
  • Before buying an induction hob for your Newport, Gwent home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.

Questions about hob and oven installation in Newport, Gwent

How much does hob and oven installation cost in Newport, Gwent?

Guide prices in Newport, Gwent are about £110 to £280 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Newport, Gwent before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Newport, Gwent. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Nearby places we cover

The same service is available a short drive from Newport, Gwent, including:

Combine hob and oven installation with other work

Free survey visit

Book a free survey visit in Newport, Gwent

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price