Hob and oven installation in Maesteg

When does hob and oven installation make sense in Maesteg?

A new kitchen layout in Maesteg sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

Many households in Maesteg switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. We cover all of Maesteg, including the CF34 postcode district, and travel out to neighbouring towns across Mid Glamorgan.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Gas supply moved to a new hob position, with pipework tested and made good
Built-in single and double ovens fixed into housings with their ventilation gaps
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer

Guide prices for hob and oven installation in Maesteg

The figures below are guide prices for Maesteg, including VAT and adjusted for typical costs across Wales. The fixed price comes after we have measured up. Prices in Wales usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for hob and oven installation in Maesteg
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£110–£280
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£110–£230
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£140–£370
New gas pipe run to a new hob positionPipework, testing and making good	£230–£740

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Maesteg?

The housing mix across Mid Glamorgan includes valley terraces, post-war council-built houses, seaside bungalows and new-build estates, so no two kitchen fits are quite alike. Valley terraces often have a narrow kitchen in a rear extension, while post-war houses in towns such as Bridgend tend to have a compact room beside the dining area.

Soft water is usual across Mid Glamorgan, so limescale is less of a concern and taps and boiling water taps tend to stay cleaner. Steep valley streets and terraces built into hillsides can mean steps, tight turns and limited parking, so carrying long worktops is planned at the survey.

Building regulations, electrics and gas in Maesteg

In Wales, gas hobs, cookers and pipework are for Gas Safe registered engineers only. Part P is wider than in England: a new cooker circuit is notifiable, and so is extending an existing circuit within a kitchen, for example to add a cooker outlet. That means most hob and oven electrics are certified through a competent person scheme or building control, and all of it must meet BS 7671.

The northern fringe of the area falls within Bannau Brycheiniog National Park, and listed buildings or conservation areas may need consent for new external vents.

Planning ahead

Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Mid Glamorgan.
Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.

Questions about hob and oven installation in Maesteg

How much does hob and oven installation cost in Maesteg?

For connecting a gas hob to an existing supply, budget around £110 to £280 including VAT in Maesteg. That reflects typical costs in Wales; we confirm the actual figure in writing once we have measured up.

Do you work near Maesteg as well?

Yes. As well as Maesteg itself, we cover the rest of Mid Glamorgan and nearby towns such as Neath and Bridgend. The process is the same wherever the kitchen is.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Hob and oven installation in neighbouring towns

Neighbouring towns where we offer hob and oven installation: