Hob and oven installation in Inverness

Why do people in Inverness choose hob and oven installation?

Landlords in the Highlands replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.

Many households in Inverness switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. Our Highlands coverage reaches every part of Inverness (IV2) and out towards Dingwall.

What is in a typical job?

Your written quote lists everything included. For hob and oven installation, that normally means:

Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Gas supply moved to a new hob position, with pipework tested and made good
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Old hob or oven disconnected safely and taken away for recycling

Hob and oven installation prices in Inverness

These guide ranges include VAT at 20% and are adjusted for prices in Scotland. We confirm your price in writing after a free survey visit. Costs across Scotland tend to sit under UK averages, which these ranges reflect.

Hob and oven installation prices in Inverness
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£110–£280
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£110–£240
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£140–£380
New gas pipe run to a new hob positionPipework, testing and making good	£240–£750

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of the Highlands include stone crofthouses, Victorian villas, post-war council-built houses and timber-framed kit houses. Older crofthouses often have a small kitchen in a lean-to, while Victorian villas in Inverness and Nairn tend to have separate kitchens with room to open up.

Long distances, single-track roads and winter weather can affect delivery and fitting days, so lead times and worktop lengths need planning well in advance. Mains water across the Highlands is soft, though many remote homes rely on private supplies, which may need testing and filtering before a boiling water tap goes in.

What rules apply to hob and oven installation in Inverness?

In Scotland, gas hobs, cookers and pipework must be fitted and tested by a Gas Safe registered engineer. Replacing a hob or oven, or adding a cooker circuit in a house, does not normally need a building warrant, but the electrics must meet building standards 4.5 and 4.6 and BS 7671. Ask for an Electrical Installation Certificate for any new circuit.

Homes in the Cairngorms National Park, listed buildings and conservation areas may need consent for a new external vent or changes to historic features.

Planning ahead

Before buying an induction hob for your Inverness home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in the Highlands can be cut correctly by the fabricator.
If you are replacing an old cooker with a separate hob and oven in your Inverness kitchen, ask for the gas supply position and condition to be checked first.
Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.

Questions about hob and oven installation in Inverness

How much does hob and oven installation cost in Inverness?

Hob and oven installation in Inverness typically costs £110 to £280 including VAT for connecting a gas hob to an existing supply, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Inverness before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Inverness. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Nearby places we cover

Neighbouring towns where we offer hob and oven installation: