Kitchen Installers UK

Hob and oven installation · East Riding of Yorkshire

Hob and oven installation in Hull

Need hob and oven installation in Hull? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.

Guide price£110 to £760
Postcodes includeHU1, HU2, HU3 and HU4
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Why hob and oven installation for a Hull home?

Keen cooks across the East Riding of Yorkshire often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.

Some people in Hull buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified. Homes right across Hull are covered, as are nearby places such as Beverley, Hornsea and the villages in between.

What we cover for hob and oven installation in Hull

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Old hob or oven disconnected safely and taken away for recycling
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Gas supply moved to a new hob position, with pipework tested and made good

Guide prices for hob and oven installation in Hull

The figures below are guide prices for Hull, including VAT and adjusted for typical costs across Yorkshire and the Humber. The fixed price comes after we have measured up. Prices in Yorkshire and the Humber usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for hob and oven installation in Hull
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£110–£280
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£110–£240
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£140–£380
New gas pipe run to a new hob positionPipework, testing and making good£240–£760

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Hull homes

Typical homes in this part of the East Riding of Yorkshire include Victorian terraces, interwar semis, post-war council-built houses and coastal bungalows. Victorian terraces in Hull often have a long, narrow back kitchen, while coastal bungalows and interwar semis tend to have a squarer room that suits an L-shape.

Much of the East Riding draws on chalk groundwater and is hard, so limescale on taps and boiling water taps is common and a filter can help. Rural roads and farm tracks across the Wolds can be narrow for lorries, while terraced streets in Hull often have limited parking near the front door.

What rules apply to hob and oven installation in Hull?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Consent is rarely needed for a kitchen, though listed Georgian houses and conservation areas, such as the older parts of Beverley, may need it for a new street-facing vent.

Before you book hob and oven installation in Hull

  • Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in the East Riding of Yorkshire.
  • If you are replacing an old cooker with a separate hob and oven in your Hull kitchen, ask for the gas supply position and condition to be checked first.
  • If your Hull home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Hull

How much does hob and oven installation cost in Hull?

Guide prices in Hull are about £110 to £280 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Hull before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Hull. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Also covering nearby towns

Neighbouring towns where we offer hob and oven installation:

Other kitchen work in Hull

Free survey visit

Book a free survey visit in Hull

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price