Hob and oven installation · Argyll and Bute
Hob and oven installation in Dunoon
Hob and oven installation in Dunoon starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.
Why do people in Dunoon choose hob and oven installation?
Families in Dunoon adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.
A new kitchen layout in Dunoon sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. We work throughout Dunoon (PA23) and across the wider Argyll and Bute area.
What is in a typical job?
The exact scope is agreed after the survey, but a typical job in Dunoon covers:
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Built-in single and double ovens fixed into housings with their ventilation gaps
Guide prices for hob and oven installation in Dunoon
As a starting point for Dunoon, these ranges include VAT at 20% and allow for typical labour costs in Scotland. Costs across Scotland tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £110–£280 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £110–£240 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £140–£380 |
| New gas pipe run to a new hob positionPipework, testing and making good | £240–£750 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Local homes and their kitchens
You will find Victorian villas, whitewashed cottages, tenement flats and post-war bungalows throughout Argyll and Bute. Victorian villas in Dunoon and Oban often have a separate scullery and a larger kitchen, while cottages and bungalows tend to have a compact room at the back.
Long single-track roads are common, and some mainland addresses are quickest reached by ferry, so delivery dates, vehicle size and worktop lengths need planning around timetables and weather. Soft water is usual across Argyll and Bute, so limescale is rarely a concern, though rural homes on private supplies may need their own filtering.
Regulations for kitchen work in Dunoon
In Scotland, gas hobs, cookers and pipework must be fitted and tested by a Gas Safe registered engineer. Replacing a hob or oven, or adding a cooker circuit in a house, does not normally need a building warrant, but the electrics must meet building standards 4.5 and 4.6 and BS 7671. Ask for an Electrical Installation Certificate for any new circuit.
Parts of Cowal lie within Loch Lomond and The Trossachs National Park, and listed buildings or conservation areas may need consent for a new external vent.
Planning ahead
- Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Argyll and Bute can be cut correctly by the fabricator.
- Before buying an induction hob for your Dunoon home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- If you are replacing an old cooker with a separate hob and oven in your Dunoon kitchen, ask for the gas supply position and condition to be checked first.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
Questions about hob and oven installation in Dunoon
How much does hob and oven installation cost in Dunoon?
Guide prices in Dunoon are about £110 to £280 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Which parts of Dunoon do you work in?
All of them. Our Argyll and Bute coverage takes in the whole of Dunoon, including the PA23 postcode district, as well as surrounding towns such as Oban. If you are unsure, send us your postcode.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Nearby places we cover
Neighbouring towns where we offer hob and oven installation: