Kitchen Installers UK

Hob and oven installation · Northern Ireland

Hob and oven installation in County Armagh

If you need hob and oven installation anywhere in County Armagh, we survey the kitchen, agree the scope with you and book every trade through to handover.

Guide price£110 to £700
Towns covered3 towns, including Craigavon
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

What prompts hob and oven installation in County Armagh?

If your County Armagh kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.

A new kitchen layout in County Armagh sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

What does hob and oven installation in County Armagh include?

Here is what usually goes into hob and oven installation, adjusted to your County Armagh kitchen after we have measured it:

  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Old hob or oven disconnected safely and taken away for recycling

How much does hob and oven installation cost in County Armagh?

The figures below are guide prices for County Armagh, including VAT and adjusted for typical costs across Northern Ireland. The fixed price comes after we have measured up. Costs across Northern Ireland tend to sit under UK averages, which these ranges reflect.

How much does hob and oven installation cost in County Armagh?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£110–£260
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£110–£220
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£130–£350
New gas pipe run to a new hob positionPipework, testing and making good£220–£700

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes across County Armagh

The housing mix across County Armagh includes Georgian townhouses, red-brick terraces, new town houses and rural bungalows, so no two kitchen fits are quite alike. Georgian houses in Armagh often have kitchens in former back rooms, while new-town houses in Craigavon and rural bungalows tend to have compact rectangular kitchens.

Hardness in County Armagh depends on the source, from soft to moderately hard, so check with your water supplier before choosing a filter. Country lanes and farm entrances can be tight for delivery lorries, and older terraced streets may have limited parking, so delivery is planned ahead.

Rural bungalow refits are common, often adding a utility room for boots and laundry, more storage and an open kitchen-dining area. Terraces and Georgian town houses tend to have smaller kitchens, where careful planning around period features, chimney breasts and uneven walls matters.

Rules for hob and oven installation in County Armagh

Gas Safe registration applies in Northern Ireland too, so only a registered engineer may connect or move a gas hob, cooker or gas pipe. There is no Part P-style notification for domestic electrics, but a new cooker circuit for an induction hob or double oven should be designed, installed and tested to BS 7671, and you should receive a certificate for it.

Armagh's Georgian centre is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.

Before you start

  • If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
  • Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
  • A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
  • Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
  • If you are moving the hob in your County Armagh kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.

Questions about hob and oven installation in County Armagh

How much does hob and oven installation cost in County Armagh?

Guide prices in County Armagh are about £110 to £260 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover the whole of County Armagh?

Yes. We carry out hob and oven installation across County Armagh, including Craigavon, Portadown and Armagh. Every job starts with a free survey visit and an itemised written quote.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation in towns across County Armagh

Choose a town for local guide prices and postcode coverage:

Hob and oven installation in nearby areas

Free survey visit

Book a free survey visit in County Armagh

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price