Kitchen Installers UK

Hob and oven installation · County Londonderry

Hob and oven installation in Coleraine

Homeowners and landlords in Coleraine can book us for hob and oven installation: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely.

Guide price£110 to £700
Postcodes includeBT51 and BT52
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Thinking about hob and oven installation in Coleraine?

Many households in Coleraine switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

Landlords in County Londonderry replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files. Coleraine sits about 27 miles east of Derry/Londonderry, and our County Londonderry coverage takes in everything in between.

What we cover for hob and oven installation in Coleraine

Here is what usually goes into hob and oven installation, adjusted to your Coleraine kitchen after we have measured it:

  • Old hob or oven disconnected safely and taken away for recycling
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested

Hob and oven installation prices in Coleraine

Typical hob and oven installation prices for homes in Coleraine, including VAT and adjusted for Northern Ireland. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in Northern Ireland are generally lower than in London and the South East, so these ranges are a little below the national guide.

Hob and oven installation prices in Coleraine
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£110–£260
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£110–£220
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£130–£350
New gas pipe run to a new hob positionPipework, testing and making good£220–£700

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Coleraine

You will find red-brick terraces, Georgian townhouses, rural bungalows and post-war estate houses throughout County Londonderry. Terraced houses in the city and in Coleraine often have a narrow kitchen in the return, while rural bungalows tend to have a larger kitchen with space for dining.

Steep streets in the city, terraces with limited parking and long country roads can each affect deliveries, so the route for worktops is checked at the survey. County Londonderry's mains water is generally soft, so limescale is rarely a big problem and taps and boiling water taps tend to stay cleaner.

Building regulations, electrics and gas in Coleraine

Gas Safe registration applies in Northern Ireland too, so only a registered engineer may connect or move a gas hob, cooker or gas pipe. There is no Part P-style notification for domestic electrics, but a new cooker circuit for an induction hob or double oven should be designed, installed and tested to BS 7671, and you should receive a certificate for it.

The historic walled city is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.

Practical advice for Coleraine homeowners

  • Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
  • Before buying an induction hob for your Coleraine home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Coleraine

How much does hob and oven installation cost in Coleraine?

Guide prices in Coleraine are about £110 to £260 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Coleraine?

Yes. We work across Coleraine, including the BT51 and BT52 postcode districts, and nearby towns such as Ballymoney and Limavady. Book a free survey visit and we will arrange a time that suits you.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Nearby places we cover

We also carry out hob and oven installation in these towns near Coleraine:

Combine hob and oven installation with other work

Free survey visit

Book a free survey visit in Coleraine

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price