Kitchen Installers UK

Hob and oven installation · Gwynedd

Hob and oven installation in Caernarfon

Homeowners and landlords in Caernarfon can book us for hob and oven installation: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely.

Guide price£110 to £740
Postcodes includeLL55
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Is hob and oven installation right for your Caernarfon kitchen?

A new kitchen layout in Caernarfon sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

If your Caernarfon kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. We work throughout Caernarfon (LL55) and across the wider Gwynedd area.

What we cover for hob and oven installation in Caernarfon

Here is what usually goes into hob and oven installation, adjusted to your Caernarfon kitchen after we have measured it:

  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Old hob or oven disconnected safely and taken away for recycling
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies

How much does hob and oven installation cost in Caernarfon?

The figures below are guide prices for Caernarfon, including VAT and adjusted for typical costs across Wales. The fixed price comes after we have measured up. Labour rates in Wales are generally lower than in London and the South East, so these ranges are a little below the national guide.

How much does hob and oven installation cost in Caernarfon?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£110–£280
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£110–£230
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£140–£370
New gas pipe run to a new hob positionPipework, testing and making good£230–£740

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Caernarfon?

The housing mix across Gwynedd includes slate and stone cottages, quarry town terraces, farmhouses and seaside bungalows, so no two kitchen fits are quite alike. Quarry-town terraces and stone cottages often have a small back kitchen or lean-to, while bungalows on Anglesey and the coast tend to have a simple square kitchen.

Mountain roads, narrow village streets and Anglesey addresses reached over the Menai bridges can affect delivery vehicles, so timing and worktop lengths are planned ahead. Gwynedd's mains water is soft, so limescale is rarely an issue and taps, sinks and boiling water taps stay cleaner for longer.

Regulations for kitchen work in Caernarfon

In Wales, gas hobs, cookers and pipework are for Gas Safe registered engineers only. Part P is wider than in England: a new cooker circuit is notifiable, and so is extending an existing circuit within a kitchen, for example to add a cooker outlet. That means most hob and oven electrics are certified through a competent person scheme or building control, and all of it must meet BS 7671.

Homes inside Eryri National Park, listed cottages and conservation areas may need consent for a new external vent or changes affecting historic features.

Practical advice for Caernarfon homeowners

  • If you are replacing an old cooker with a separate hob and oven in your Caernarfon kitchen, ask for the gas supply position and condition to be checked first.
  • Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
  • If you are moving the hob in your Caernarfon kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
  • Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.

Questions about hob and oven installation in Caernarfon

How much does hob and oven installation cost in Caernarfon?

Hob and oven installation in Caernarfon typically costs £110 to £280 including VAT for connecting a gas hob to an existing supply, based on prices in Wales. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Caernarfon as well?

Yes. As well as Caernarfon itself, we cover the rest of Gwynedd and nearby towns such as Bangor, Gwynedd and Holyhead. The process is the same wherever the kitchen is.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Also covering nearby towns

The same service is available a short drive from Caernarfon, including:

Planning more than one job in Caernarfon?

Free survey visit

Book a free survey visit in Caernarfon

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price