Kitchen Installers UK

Hob and oven installation · Bedfordshire

Hob and oven installation in Ampthill

Our hob and oven installation service covers Ampthill and nearby places such as Kempston and Bedford, with a free survey visit and an itemised written quote as the first step.

Guide price£130 to £860
Postcodes includeMK45
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Why do people in Ampthill choose hob and oven installation?

If the oven in your Ampthill kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing.

Landlords in Bedfordshire replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files. If your home is in Ampthill or close by in Kempston or Bedford, the same survey, quote and fitting process applies.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Old hob or oven disconnected safely and taken away for recycling
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested

What does hob and oven installation cost in Ampthill?

The figures below are guide prices for Ampthill, including VAT and adjusted for typical costs across the East of England. The fixed price comes after we have measured up. Prices in the East of England usually run above the national guide, mainly because labour and parking cost more.

What does hob and oven installation cost in Ampthill?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£130–£320
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£130–£270
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£160–£430
New gas pipe run to a new hob positionPipework, testing and making good£270–£860

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Ampthill?

Across Bedfordshire you will often find Victorian terraces, 1930s semis, post-war council-built houses and new-build estates, and each shapes the kitchen differently. Terraced houses here often have a narrow galley or back-addition kitchen, while interwar semis tend to have a small square kitchen at the rear.

Town-centre terraces can have tight on-street parking, so it helps to plan where a van unloads and how long worktops will pass through a narrow hallway. Water across most of Bedfordshire is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Building regulations, electrics and gas in Ampthill

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Fitting a kitchen needs no planning permission, but listed cottages in the older market towns may need listed building consent for changes such as a new vent through a historic wall.

Practical advice for Ampthill homeowners

  • If you are replacing an old cooker with a separate hob and oven in your Ampthill kitchen, ask for the gas supply position and condition to be checked first.
  • Before buying an induction hob for your Ampthill home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
  • If your Ampthill home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Ampthill

How much does hob and oven installation cost in Ampthill?

For connecting a gas hob to an existing supply, budget around £130 to £320 including VAT in Ampthill. That reflects typical costs in the East of England; we confirm the actual figure in writing once we have measured up.

Do you cover all of Ampthill?

Yes. We work across Ampthill, including the MK45 postcode district, and nearby towns such as Kempston and Bedford. Book a free survey visit and we will arrange a time that suits you.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Nearby places we cover

Close to Ampthill? We cover these nearby towns too:

Planning more than one job in Ampthill?

Free survey visit

Book a free survey visit in Ampthill

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price